The illustrated glossary
Inside your appliance. Parts, in plain English.
Learn what a part does before you phone, so you and the technician begin with the same picture.

Find a term, A–Z.
Where it lives. What it does.
Model-number words
Decode the label.
- Washer drain pump filter
- The 796 front-load washer has a drain pump filter behind a small access panel. It catches lint, buttons, keys and coins before they reach the pump. When the washer drains slowly or not at all, the guide’s list starts with the drain hose and then this filter.
- Dryer lint filter
- The lint filter is the screen that catches lint before it reaches the exhaust. Kenmore’s dryer guides say to empty it before every load, and the Elite HE guide lists a clogged lint screen first when clothes dry slowly or the load comes out hot. The 796 guide adds a periodic wash.
- Refrigerator water filter
- This cartridge treats the water on its way to the dispenser and the ice maker. Kenmore’s refrigerator guides say to replace it about every six months, when the indicator comes on, when dispenser output drops or when the ice cubes get smaller than normal.
Water in and out.

Washer water inlet screens
Each water valve on a Kenmore washer has a small filter screen where the hot and cold hoses connect. The guides tie them to slow or no filling: Calypso LF (Long Fill) asks whether the inlet valve screens are clear, and the 796 front-load guide says to clean them if the washer does not fill properly.

Washer drain pump filter
The 796 front-load washer has a drain pump filter behind a small access panel. It catches lint, buttons, keys and coins before they reach the pump. When the washer drains slowly or not at all, the guide’s list starts with the drain hose and then this filter.

Dishwasher filters
The Kenmore 665 Ultra Wash HE dishwasher has two removable filters at the bottom center of the tub: an upper filter assembly and a lower filter. The guide says clean them periodically and never run the dishwasher without both properly locked in place.

Refrigerator water filter
This cartridge treats the water on its way to the dispenser and the ice maker. Kenmore’s refrigerator guides say to replace it about every six months, when the indicator comes on, when dispenser output drops or when the ice cubes get smaller than normal.
Air, heat and drying.

Dryer lint filter
The lint filter is the screen that catches lint before it reaches the exhaust. Kenmore’s dryer guides say to empty it before every load, and the Elite HE guide lists a clogged lint screen first when clothes dry slowly or the load comes out hot. The 796 guide adds a periodic wash.

Dryer exhaust vent
The exhaust vent carries hot, moist air outside. The 796 guide calls poor venting the most common cause of dryer problems, and the Elite HE guide’s AF code means the vent may be crushed or blocked. Both guides say to check the vent run and the outside hood for lint.

Dryer temperature sensor
Kenmore’s 796 dryer guides print one line about the temperature sensor: if the display shows tE1 or tE2, the cause is “Temperature sensor failure,” and the step is to turn off the dryer and get service. They give no owner repair and no reading of what failed.

Dryer moisture sensor
Some Kenmore dryers have a sensor that reads how damp the clothes are. The 796 guide says Auto Dry cycles use it to adjust drying time, and that light items mixed with heavy ones can fool it because the light items dry first. Your own guide says whether your model has one.
Doors, locks and motors.

Washer door and lid lock
A Kenmore washer locks its door or lid while a cycle runs, and it will not spin unless the lock has engaged. The 796 guides print dE for a door or lid left open and dL for a lid lock switch error. Calypso washers print LS for the lid switch, and the 110 front-load guide lists F22 as “Front door lock.”

Range oven door lock
Kenmore’s Elite 790 ranges lock the oven door with a motor-driven latch. The guide says it locks automatically when you turn on oven lockout (“Loc” shows) and for Self Clean, and warns you not to open or close the door while the latch is moving.

Washer drive motor
On 796 Kenmore washers the drive motor is the part behind the LE code. The front-load guide prints LE as “A motor error has occurred,” and the top-load guide says the motor’s thermal overload protection has tripped. Both say to let the washer stand for 30 minutes, then restart.
Cold and ice.

Refrigerator condenser coils
The condenser coils release heat from the sealed system. The Kenmore 795 guide’s care section tells you to vacuum the condenser cover and vents with a brush attachment and says not to remove the panel over the coil area. It gives no cleaning schedule.

Refrigerator ice maker
The automatic ice maker takes in water, freezes it into cubes and sends them to the bin. The Kenmore 795 guide says a new refrigerator takes 12 to 24 hours to start making ice and 72 hours to reach full output, and lists the switch, the ice sensor, the shut-off arm and the water supply as the usual checks.
Which part, which problem, which code.
Every part is tied to the problems it can bring on and to the codes that point at it.
Refrigerator
Ice-maker
Range
Freezer
Dishwasher
Washer
Dryer
Oven
What does the glossary explain?
Everyday words from the Kenmore guides, such as lint filter, vent, door lock or moisture sensor. Each entry says what the part does in plain words and is not a repair instruction.
Does a glossary entry diagnose my appliance?
No. Knowing what a part does does not show whether yours has failed. Use the entries to follow a guide or a technician, not to choose a part to buy.
Can I order a part from a picture?
We would not. Kenmore units from different years can look alike and use different parts. A technician checks any part against your model number before anything is ordered.
Why do some terms link to guides?
The link leads to a page where the term appears in a real task, such as clearing a lint filter. It shows you where the part sits in practice.
Code, symptom, part or service
Link the message to what comes next.
Kenmore washer not spinning
Start with what the display and the lid or door say. A Kenmore washer will not spin until the lid or door is latched, and an out-of-balance load, a slow drain or too many suds can each hold the spin back. Rebalance, check the drain, then book a visit.
Washer repair
Book a diagnostic for your model, carried out at the appliance.
Find your metro
Office details, and the access information to pass along.










