Kenmore washer LE / Motor

Kenmore washer
error LE

Washer / display referenceLE

On a 796 front-load Kenmore washer, LE means a motor error; on the 796 top-load (2927) it means the motor's thermal overload protection has tripped. Both guides give the same first move: let the washer stand for 30 minutes, then restart the cycle.

Also shown as LE

Last reviewed

Washer / display referenceLE
Meaning
On a 796 front-load Kenmore washer, LE means a motor error; on the 796 top-load (2927) it means the motor's thermal overload protection has tripped. Both guides give the same first move: let the washer stand for 30 minutes, then restart the cycle.
Who handles it
Owner checks first, then a technician
Related codes
Source
Use & Care Guide, Kenmore front-load washers 796.4136/4146/4156

What Kenmore washer LE means.

What it means

On a 796 front-load Kenmore washer, LE means a motor error; on the 796 top-load (2927) it means the motor's thermal overload protection has tripped. Both guides give the same first move: let the washer stand for 30 minutes, then restart the cycle.

What you can safely check

Leave it alone so the motor can cool.

When to call a technician

LE shows again after the 30-minute rest and a restart.

Your checklist / stored on this device

Safe checks, in order.

0 of 5 checks done
  1. Kenmore washer LE: Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Let the washer rest for 30 minutes

    Leave it alone so the motor can cool. Do not open the cabinet.

  2. A worn rating label on the rim of an older top-load washer
    Illustration. Follow your model’s instructions.
    Check 2

    Check the load

    A very heavy or tangled load can strain the motor. Remove some of it.

  3. Over the shoulder of a technician in a navy shirt holding a tablet with a blank checklist, a white washer behind him.
    Illustration. Follow your model’s instructions.
    Check 3

    Restart the cycle

    After the wait, start the cycle again and watch for LE.

  4. A technician with a washer drain pump in hand
    Illustration. Follow your model’s instructions.
    Check 4

    Unplug it if LE returns

    If LE still shows after the rest, the top-load guide moves to unplug and service.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Book a visit

    A repeat means the motor needs inspection.

Still showing LE?

Give us the model and the checks you have already done, and open your request from here.

Book a visit

The drum drive.

Conceptual Washer sectionDrumMotorDriveControl1234
  1. 1Drum

Simplified drawing; the real layout depends on the model. Tap an outlined part to see its photo and the check that goes with it.

Parts behind the message.

Round direct-drive washer motor stator with copper coil windings and a white connector, a screwdriver and towel beside it.

Component reference

Washer drive motor

On 796 Kenmore washers the drive motor is the part behind the LE code.

Read the definition

A little more context.

What does LE mean on a front-load?

The 796 front-load troubleshooting list reads A motor error has occurred, with the 30-minute stand and a call for service if LE persists.

Read the supporting manual

What does LE mean on the top-load?

The 2927 guide says the thermal overload protection circuit in the motor has tripped, which is why the washer needs to cool.

Read the supporting manual

How is LE different from tE?

tE is a control error on front-loads and a thermistor error on top-loads. LE is the motor.

Read the supporting manual

The manual behind the message.

Manufacturer document

Use & Care Guide, Kenmore front-load washers 796.4136/4146/4156

Kenmore (guide as published by Sears / Transform SR Brands)

Doc 1909134L / P/N MFL68005592 (Transform SR Brands) / PDF p.46 (Troubleshooting, display-graphic row)

Manufacturer document

Use & Care Guide, Kenmore front-load washer 796.4198

Kenmore (guide as published by Sears / Transform SR Brands)

Doc 1807405L / P/N MFL68005554 / PDF p.31 (same table)

Manufacturer document

Use & Care Guide, Kenmore top-load washer 796.2927

Kenmore (guide as published by Sears / Transform SR Brands)

Doc 1007244L / P/N MFL42065471 / PDF p.28 (top-load: thermal overload)

Kenmore 796 front-load washers 4136/4146/4156/4198 and top-load 2927; guides 1909134L p. 46, 1807405L p. 31 and 1007244L p. 28.

Here to help

Good questions.
Clear answers.

Talk to our team
Why 30 minutes?

The guide asks you to let the washer stand for 30 minutes and then restart. On the top-load, the wait lets the motor's thermal protection cool.

Is LE a lid or door problem?

No. LE is a motor message. Door and lid messages are dE, dL and F22.

Does the 402 family read LE differently?

Yes. A 402 front-load chart reads LE as low water level. This page covers the 796 guides only.

What should I do if LE returns after the rest?

On the top-load, unplug the washer and arrange service. On a front-load, call for service as well.

Can overloading cause LE?

The guides do not say. A lighter load is still a sensible precaution.

Let’s take care of it.

Still going after all these years.
Let’s keep it that way.