Diagnostics and repair
Experienced technicians look the appliance over before they suggest any work. OEM parts can be ordered, and the correct part is matched to your model.
Display reference
Choose the appliance and enter the code exactly. Kenmore meanings change from model to model.
On a 796 front-load Kenmore washer, LE means a motor error; on the 796 top-load (2927) it means the motor's thermal overload protection has tripped. Both guides give the same first move: let the washer stand for 30 minutes, then restart the cycle.
Read the LE checks29 researched washer codes. A code can mean different things on different models, so read it against your own manual.
Models made under the 2026 Curtis International license are not covered yet. uL, F01, oL, dU, F29, F26 and F27 are not printed in any Kenmore guide we read. The 796 top-load clutch row could not be read at the page resolution we used, so it is not included.
F6E1 F4E1 F6E6 F2E2 F9E1 F6E4 F8E1 FAE3 F8E2 F6E2 F5E1 F4E2 F1E1 F1E2 F2E1 F3E1 F3E2 F7E1 F6E7 F9E2
Models made under the 2026 Curtis International license are not covered yet. F6E1 and the 19 other F#E# codes, with their numeric forms such as 6-1, are not printed in any Kenmore guide we read.
F16 F11 F3 F1 F2 F8 F4 F5 F18 F9 F20 F6 F10 F19
Models made under the 2026 Curtis International license are not covered yet. F16, F4, F11 and the other F-codes have no meaning in any Kenmore range guide we read. The five decoded range rows are quote-only, with page numbers not recorded.

29 codes we have looked into, with their sources and model limits.

6 codes we have looked into, with their sources and model limits.

7 codes we have looked into, with their sources and model limits.

See what the manuals cover and which display names remain unexplained.

See what the manuals cover and which display names remain unexplained.

6 codes we have looked into, with their sources and model limits.

See what the manuals cover and which display names remain unexplained.

See what the manuals cover and which display names remain unexplained.

See what the manuals cover and which display names remain unexplained.

See what the manuals cover and which display names remain unexplained.

See what the manuals cover and which display names remain unexplained.
Note the appliance type, the model and each character shown on the display, all together.
A message suggests checks. It does not settle which part has to be replaced.
Experienced technicians look the appliance over before they suggest any work. OEM parts can be ordered, and the correct part is matched to your model.
Covered repairs under a Kenmore manufacturer warranty are handled through Kenmore. We stand behind our own work with a workmanship warranty.
Eleven codes that a Kenmore guide explains: ten on washers (LE, dE, LF, FL, dL, Sd, CA, CE, LS, Ld) and PF on dryers. Other codes sit on shared pages, each saying what the guides print.
The Kenmore guides we read print no table for those codes. One shared page per appliance lists what the guides do say and the safe steps. We do not guess a meaning.
No. CL is a current limit on a 110 Calypso washer and a control lock on a 796 top-load. Check the model prefix, 110 or 796, against what the page describes.
Not yet. Models made under the Curtis International license from 2026 have their own guides, and we have not read them. The pages here describe the older Sears-era 110 and 796 families.
Photograph the whole display, then read the model number from the plate. A similar code on another product is no guide. Give us both when you book a technician.
Code, symptom, part or service
Start with what the display and the lid or door say. A Kenmore washer will not spin until the lid or door is latched, and an out-of-balance load, a slow drain or too many suds can each hold the spin back. Rebalance, check the drain, then book a visit.
Book a diagnostic for your model, carried out at the appliance.
Office details, and the access information to pass along.