Kenmore washer CA / Overload

Kenmore washer
error CA

Washer / display referenceCA

CA is the Calypso washer's current limit message. The guide's question is whether the machine is overloaded, and its remedy is one key press that wipes the display. Take some items out before you start again. A 796 top-load uses CL for something else, so match the code to your model prefix.

Also shown as CA

Last reviewed

Washer / display referenceCA
Meaning
CA is the Calypso washer's current limit message. The guide's question is whether the machine is overloaded, and its remedy is one key press that wipes the display. Take some items out before you start again. A 796 top-load uses CL for something else, so match the code to your model prefix.
Who handles it
Owner checks first, then a technician
Related codes
Source
Use & Care Guide, Kenmore Calypso washers 110.2206/2408/2506/2508

What Kenmore washer CA means.

What it means

CA is the Calypso washer's current limit message. The guide's question is whether the machine is overloaded, and its remedy is one key press that wipes the display. Take some items out before you start again. A 796 top-load uses CL for something else, so match the code to your model prefix.

What you can safely check

Take out a few heavy or soaked items.

When to call a technician

CA is back even though the load was smaller and the display had been cleared.

Your checklist / stored on this device

Safe checks, in order.

0 of 5 checks done
  1. Kenmore washer CA: Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Pull out part of the load

    Take out a few heavy or soaked items. A tub packed beyond its limit is the first thing the guide asks about.

  2. A worn rating label on the rim of an older top-load washer
    Illustration. Follow your model’s instructions.
    Check 2

    Press STOP/CANCEL

    This wipes the code from the display so the control accepts a new cycle.

  3. Over the shoulder of a technician in a navy shirt holding a tablet with a blank checklist, a white washer behind him.
    Illustration. Follow your model’s instructions.
    Check 3

    Check the plug and the cord

    Confirm the cord is in a grounded three-prong outlet with no extension cord in between. The same guide page lists both under Washer stops.

  4. A technician with a washer drain pump in hand
    Illustration. Follow your model’s instructions.
    Check 4

    Restart with the smaller load

    Choose the cycle afresh and start it. Watch whether CA comes back in the first minutes.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Write the code down for the visit

    If CA recurs with a light load, note the cycle you chose and the model number.

Still showing CA?

Give us the model and the checks you have already done, and open your request from here.

Book a visit

The drum drive.

Conceptual Washer sectionDrumMotorDriveControl1234
  1. 1Drum

Simplified drawing; the real layout depends on the model. Tap an outlined part to see its photo and the check that goes with it.

A little more context.

What does CA stand for on a Calypso?

The guide prints it as CA or CL, both described as Current Limit, followed by the question Is the washer overloaded? The remedy is one key press, STOP/CANCEL.

Read the supporting manual

Why does a heavy load matter?

The guide ties the code to overloading. A tub filled with very wet or bulky laundry demands more from the motor, which the control seems to guard against. Cutting the load is the owner step on the page.

Read the supporting manual

Is CL always the same as CA?

No. On the Calypso both letters pair mean current limit. On the 796 top-load, CL is the Control Lock display, with every key but CONTROL LOCK and POWER disabled, and it is turned off by holding DRAIN & SPIN for five seconds.

Read the supporting manual

The manual behind the message.

Manufacturer document

Use & Care Guide, Kenmore Calypso washers 110.2206/2408/2506/2508

Kenmore (guide as published by Sears / Transform SR Brands)

Doc L0412465 / P/N 8543703 (Sears, Roebuck and Co.) / PDF p.18

Manufacturer document

Use & Care Guide, Kenmore top-load washer 796.2927

Kenmore (guide as published by Sears / Transform SR Brands)

Doc 1007244L / P/N MFL42065471 / PDF p.22 (Control Lock)

Calypso (110.2206, 2408, 2506, 2508), guide L0412465 p. 18; the 796 top-load control-lock meaning of CL comes from guide 1007244L p. 22.

Here to help

Good questions.
Clear answers.

Talk to our team
Why does the guide ask if the washer is overloaded?

CA is described as Current Limit, followed by that question. A tub packed beyond its limit is the owner-side cause the guide names.

What does the CL on a 796 top-load mean?

With CONTROL LOCK on, the display alternates between CL and the time left, and all keys but CONTROL LOCK and POWER are dead. Holding DRAIN & SPIN for five seconds turns it off.

How do I clear CA?

Press STOP/CANCEL. That clears the display, after which you can reduce the load and start again.

Does CA mean the motor is failing?

The guide does not say. It asks about load size and gives a key press, nothing more.

What if CA returns on a small load?

Check the plug and outlet, and avoid extension cords. If CA still returns, book a technician.

Let’s take care of it.

Still going after all these years.
Let’s keep it that way.