Kenmore dryer L2 / Power

Kenmore dryer
error L2

Dryer / display referenceL2

L2 on the Kenmore Elite HE 110.8772 means the drum turns but a power-supply problem at home may be keeping the heater from starting. Check the pair of fuses or breakers that feed an electric dryer, and call in an electrician if L2 persists.

Also shown as L2

Last reviewed

Dryer / display referenceL2
Meaning
L2 on the Kenmore Elite HE 110.8772 means the drum turns but a power-supply problem at home may be keeping the heater from starting. Check the pair of fuses or breakers that feed an electric dryer, and call in an electrician if L2 persists.
Who handles it
Owner checks first, then a technician
Related codes
Source
Use & Care Guide, Kenmore Elite HE dryer 110.8772

What Kenmore dryer L2 means.

What it means

L2 on the Kenmore Elite HE 110.8772 means the drum turns but a power-supply problem at home may be keeping the heater from starting. Check the pair of fuses or breakers that feed an electric dryer, and call in an electrician if L2 persists.

What you can safely check

An electric dryer runs on two household fuses or a two-pole breaker.

When to call a technician

L2 shows while both breakers are on and the dryer makes no heat.

Your checklist / stored on this device

Safe checks, in order.

0 of 4 checks done
  1. Kenmore dryer L2: Dryers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Look at the breaker panel

    An electric dryer runs on two household fuses or a two-pole breaker. Check whether either has tripped or blown.

  2. A worn rating label on the rim of an older top-load washer
    Illustration. Follow your model’s instructions.
    Check 2

    Reset or replace as needed

    The guide says to replace a blown fuse or reset a tripped breaker. A breaker that trips again straight away needs an electrician.

  3. Over the shoulder of a technician in a navy shirt holding a tablet with a blank checklist, a white washer behind him.
    Illustration. Follow your model’s instructions.
    Check 3

    Run a short test

    Start a timed dry and see whether the dryer produces heat. The drum turning only is not proof the heater is on.

  4. A technician with a washer drain pump in hand
    Illustration. Follow your model’s instructions.
    Check 4

    Stop and book if L2 stays

    If both are fine and L2 returns, switch the dryer off and book a technician or an electrician.

Still showing L2?

Give us the model and the checks you have already done, and open your request from here.

Book a visit

Heat and its safety limits.

Conceptual Dryer sectionHeaterThermostat / fuseDrumControl1234
  1. 1Heater
  2. 2Thermostat / fuse
  3. 3Drum
  4. 4Control

Simplified drawing; the real layout depends on the model. Tap an outlined part to see its photo and the check that goes with it.

A little more context.

What does L2 tell me?

It is a diagnostic code. Per the Elite HE guide, the drum still turns while trouble in the home's electrical supply may stop the heater from starting.

Read the supporting manual

Why two fuses or breakers?

The guide says an electric dryer uses two household fuses or circuit breakers, which is why it asks you to look at both. Nothing more is explained, and we add no cause of our own.

Read the supporting manual

How is L2 different from AF?

AF is an airflow warning about the vent. L2 is a power-supply warning about the heater. Neither is a numbered service code.

Read the supporting manual

The manual behind the message.

Manufacturer document

Use & Care Guide, Kenmore Elite HE dryer 110.8772

Kenmore (guide as published by Sears / Transform SR Brands)

Doc L0708325 / P/N W10136973A (Sears, Roebuck and Co.) / PDF p.19; PDF p.28

Elite HE dryer 110.8772; the L0708325 guide covers L2 on pp. 19 and 28.

Here to help

Good questions.
Clear answers.

Talk to our team
Is L2 the same as F31?

No. Kenmore prints L2. F31 is absent from every Kenmore guide we checked.

Can I keep drying without heat?

You can air-fluff, but wet loads will not dry. Fix the power problem first.

Is it safe to work in the breaker panel?

Only to flip a labeled breaker. Replacing fuses or wiring is for an electrician.

Does a gas dryer show L2?

The guide speaks of electric dryers using two fuses. Check your model type before relying on this.

What should I report to whoever comes out?

Say that the drum turns, there is no heat, both breakers were checked, and L2 stays.

Let’s take care of it.

Still going after all these years.
Let’s keep it that way.