Read the whole display
Note the model prefix (110 or 796) and the exact code. 110 dryers use E-variable or F-variable lines; 796 dryers use tE1 and tE2.
Model-specific code library
We decode PF, AF, L2 and tE1/tE2. The guides name F-variable codes only as service codes with no table, so F01 and the other F-codes get one honest page.
PF means power failure: the dryer asks whether its drying cycle was interrupted when power dropped. On the 110 Kenmore dryers, press and hold START to restart. The 8756-series guide adds that you press POWER first.
Read the PF checks6 researched dryer codes. A code can mean different things on different models, so read it against your own manual.
AF on a Kenmore Elite HE 110.8772 dryer says the vent may be crushed or blocked. Run the dryer for 5 to 10 minutes and hold your hand under the outside hood. No air means clean the exhaust system or replace the vent with heavy or flexible metal vent.
Owner checks firstE1 on a Kenmore 110-series dryer is one of the E service codes (E1, E2, E3) the guide lists. It does not decode them: its only instruction is to call for service. Unplug the dryer, jot down the code and model, and book a technician.
Book a visitL2 on the Kenmore Elite HE 110.8772 means the drum turns but a power-supply problem at home may be keeping the heater from starting. Check the pair of fuses or breakers that feed an electric dryer, and call in an electrician if L2 persists.
Owner checks firstPF means power failure: the dryer asks whether its drying cycle was interrupted when power dropped. On the 110 Kenmore dryers, press and hold START to restart. The 8756-series guide adds that you press POWER first.
Owner checks firsttE1 on Kenmore 796 dryers (the 8128 family and the 8138 steam dryers) is listed as a temperature sensor failure. The guide's remedy is to switch the dryer off and request service, so stop drying and book a technician.
Book a visittE2 on Kenmore 796 dryers is printed in the same row as tE1: temperature sensor failure. Kenmore answers with a power-down and a service request. No reset is given and no home repair is described, so book a technician.
Book a visitModels made under the 2026 Curtis International license are not covered yet. F01, F02, F20, F22 to F25, F28 to F31 and F70 to F78 are not printed in any Kenmore dryer guide we read.

We decode PF, AF, L2 and tE1/tE2. The guides name F-variable codes only as service codes with no table, so F01 and the other F-codes get one honest page.
Models made under the 2026 Curtis International license are not covered yet. F01, F02, F20, F22 to F25, F28 to F31 and F70 to F78 are not printed in any Kenmore dryer guide we read.
Note the model prefix (110 or 796) and the exact code. 110 dryers use E-variable or F-variable lines; 796 dryers use tE1 and tE2.
Switch the dryer off at the breaker before opening it. A hot smell, scorched lint or an unusually hot cabinet means stop using it and book a technician.
Long drying on a Kenmore dryer usually traces back to airflow: a clogged lint screen, a crushed or lint-packed exhaust vent, or a vent run that is too long. The guides give a quick test with your hand under the outside hood.
A Kenmore dryer that runs too hot, too cool or without heat is covered by three kinds of check in the guides: airflow, the household power supply, and a sensor message. Clear the lint and vent first, then check breakers and the gas valve on gas models.
The Kenmore guides name only a few harmless odor sources: a new electric heating element on first use, and fumes from paint or varnish in the room. They do not describe a persistent burning smell, so treat that as a reason to stop the dryer and unplug it.
Go by the instructions for your exact model. Check how we research these pages.
Models made under the 2026 Curtis International license are not covered yet. F01, F02, F20, F22 to F25, F28 to F31 and F70 to F78 are not printed in any Kenmore dryer guide we read.
Take a photo of the entire dryer display and of the model label. Note what the appliance was doing when the message came up, instead of borrowing an explanation written for a different appliance.
An old search phrase is no proof of what a code means. If our dryer manuals do not explain a message, we list the name as it appears and send you toward help, without blaming a part or a cause.
Open the manuals in this dryer library and match the models on their covers to the label on your appliance. A model that is not listed there needs its own operating instructions.