What it means
PF means power failure: the dryer asks whether its drying cycle was interrupted when power dropped. On the 110 Kenmore dryers, press and hold START to restart. The 8756-series guide adds that you press POWER first.
Kenmore dryer PF / Power
PF means power failure: the dryer asks whether its drying cycle was interrupted when power dropped. On the 110 Kenmore dryers, press and hold START to restart. The 8756-series guide adds that you press POWER first.
Also shown as PF
PF means power failure: the dryer asks whether its drying cycle was interrupted when power dropped. On the 110 Kenmore dryers, press and hold START to restart. The 8756-series guide adds that you press POWER first.
The guide for 110.8756, 8757, 8758, 8856, 8857 and 8858 says to press POWER, then press and hold START.
PF shows again without a power outage, or START does not restart the dryer.
Your checklist / stored on this device

The guide for 110.8756, 8757, 8758, 8856, 8857 and 8858 says to press POWER, then press and hold START.

The Elite HE guide skips the POWER step: press and hold START to restart the dryer.

If PF appears with no outage, write that down and book a visit.
Give us the model and the checks you have already done, and open your request from here.
Book a visitSimplified drawing; the real layout depends on the model. Tap an outlined part to see its photo and the check that goes with it.
The two guides differ by one step. Use the one for your model prefix.
Read the supporting manualIf the lights were on all along and PF still shows, that goes beyond what the guides cover, so book a visit.
Read the supporting manualNeither guide describes PF showing up while the power stayed on. Note the time it appeared and whether the lights or other appliances flickered, then book a visit.
Read the supporting manualManufacturer document
Kenmore (guide as published by Sears / Transform SR Brands)
Doc L0708325 / P/N W10136973A (Sears, Roebuck and Co.) / PDF p.28 (Dryer displaying code message)
Manufacturer document
Kenmore (guide as published by Sears / Transform SR Brands)
Doc 1506245L / P/N W10035050C / PDF p.27
This row is printed for 110 dryers: the 8756 family and the Elite HE 8772. The restart wording differs slightly between the two guides, so use the one for your model prefix.
The guide treats it as an interrupted cycle. It asks whether power failed and tells you how to restart.
The 8756-series guide says yes. The Elite HE 8772 guide only says to press and hold START.
The guides only say to restart the dryer. They do not describe what the cycle remembers.
Yes, as a power failure message, but the steps differ. See the washer PF row.
Code, symptom, part or service
L2 on the Kenmore Elite HE 110.8772 means the drum turns but a power-supply problem at home may be keeping the heater from starting. Check the pair of fuses or breakers that feed an electric dryer, and call in an electrician if L2 persists.
Long drying on a Kenmore dryer usually traces back to airflow: a clogged lint screen, a crushed or lint-packed exhaust vent, or a vent run that is too long. The guides give a quick test with your hand under the outside hood.
Book a diagnostic for your model, carried out at the appliance.
Office details, and the access information to pass along.