Start from the symptom
Kenmore dryer burning smell.
The Kenmore guides name only a few harmless odor sources: a new electric heating element on first use, and fumes from paint or varnish in the room. They do not describe a persistent burning smell, so treat that as a reason to stop the dryer and unplug it.

Start with safe observations.
Switch the appliance off and unplug it before any owner check. Be careful around standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or go past what your model’s owner instructions allow.
- 1
Stop and unplug if the smell is strong
This is our advice, not a line from the guide: a lasting burning smell is not on the normal list. Turn the dryer off at the plug.
- 2
New dryer?
The Elite HE 110 guide says the new electric heating element may smell on the first cycle and the odor will be gone afterward.
- 3
Paint, stain or varnish nearby
If you have used these where the dryer sits, ventilate the area. When the fumes are gone, rewash and dry the clothes.
- 4
Lint in the drum area and vent
The guide says lint needs removing from inside the cabinet and the exhaust vent every two years or more often, and the work should be done by a qualified person. Clean the lint screen before every load.
- 5
Check the vent material
The guide's Fire Hazard box wants a heavy metal vent, not plastic or foil.
Systems a technician may investigate.
These parts are linked to the symptom. Noticing the symptom does not show that any single part has failed.

Dryer lint filter
The lint filter is the screen that catches lint before it reaches the exhaust. Kenmore’s dryer guides say to empty it before every load, and the Elite HE guide lists a clogged lint screen first when clothes dry slowly or the load comes out hot. The 796 guide adds a periodic wash.

Dryer exhaust vent
The exhaust vent carries hot, moist air outside. The 796 guide calls poor venting the most common cause of dryer problems, and the Elite HE guide’s AF code means the vent may be crushed or blocked. Both guides say to check the vent run and the outside hood for lint.
Read the related care guide.

Clothes still damp? Feel the air at the outside hood.
Clean the lint screen before every load, run the dryer for 5 to 10 minutes and hold your hand under the outside exhaust hood. No air means the vent is blocked, so clean the run or replace plastic or foil vent with metal. Kenmore guides call poor venting the most common dryer problem.

Dryer stopped at a power cut? Press and hold START, then check two breakers.
After a power cut, a Kenmore dryer may show PF: press and hold START to restart (press POWER first on some models). If the drum turns but there is no heat, check that both household breakers or fuses are on; an electric dryer uses two. L2 points to the home power supply.
When observation becomes a service request.
Leave internal testing to a technician.
The smell is more than a first-cycle odor or comes back. Leave the dryer unplugged and book a visit; do not run it while you wait. Smoke or flames mean leave and call emergency services.
Arrange a diagnosticSources and model boundaries.
These sources back up the Kenmore dryer burning smell guidance. Read the manual that fits your model.
- Use & Care Guide, Kenmore Elite HE dryer 110.8772
Go by the instructions for your exact model. Check how we research these pages.
Is a burning smell from a new dryer normal?
The 110 guide says the new heating element may smell on the first cycle. A strong smell that continues after that is not covered, so stop using it.
Can lint cause a burning smell?
The guides stress lint control, and say vent lint can restrict air movement. They do not tie it to a smell, so we only say: keep the screen and vent clear.
Can paint fumes make my clothes smell?
Yes. The guide lists painting, staining or varnishing near the dryer as an odor source; ventilate and rewash.
Should I use the dryer while I wait for a visit?
No, if the smell is a burning one. Unplug it and wait for the technician.
Code, symptom, part or service
Link the message to what comes next.
AF
AF on a Kenmore Elite HE 110.8772 dryer says the vent may be crushed or blocked. Run the dryer for 5 to 10 minutes and hold your hand under the outside hood. No air means clean the exhaust system or replace the vent with heavy or flexible metal vent.
Kenmore dryer takes too long
Long drying on a Kenmore dryer usually traces back to airflow: a clogged lint screen, a crushed or lint-packed exhaust vent, or a vent run that is too long. The guides give a quick test with your hand under the outside hood.
Dryer lint filter
The lint filter is the screen that catches lint before it reaches the exhaust. Kenmore’s dryer guides say to empty it before every load, and the Elite HE guide lists a clogged lint screen first when clothes dry slowly or the load comes out hot. The 796 guide adds a periodic wash.
Dryer repair
Book a diagnostic for your model, carried out at the appliance.
Find your metro
Office details, and the access information to pass along.