Read the whole display
Write down the full code and the model before you press CANCEL. The reset wait is 5 minutes in a 790 guide and 30 seconds in the notes for gas range 405.7608#, so each is attributed separately.
Model-specific code library
The Kenmore 790 range guides give one shared step for any F code, and we decode only the display messages that the guides and notes name: Er, Hot, LOC/OPN, H and SAbb.
On the 405.7608# gas range, Er followed by a number or letter is a function error code. Press Cancel/Off, let the oven cool for an hour, and use it again. If Er repeats, leave the oven dark for 30 seconds or longer, then restore it.
Read the Er checks7 researched range codes. A code can mean different things on different models, so read it against your own manual.
On the 405.7608# gas range, Er followed by a number or letter is a function error code. Press Cancel/Off, let the oven cool for an hour, and use it again. If Er repeats, leave the oven dark for 30 seconds or longer, then restore it.
Model-dependent / read firstThe 405.7608# guide prints ErrF in the same troubleshooting row as Er, as a function error code. Press Cancel/Off, wait one hour, then use the oven again. If ErrF returns, cut all power to the oven for at least 30 seconds.
Model-dependent / read firstH on the Kenmore induction range 982.9685# means the cooking zone is too hot to touch. It clears by itself once the surface cools to a safe temperature. Treat it as a warning light, not a failure.
Owner checks firstHot appears on the 405.7608# gas range display when the oven is above 100 degrees F. A steam clean cannot start until the oven cools. It is a message, not an error.
Owner checks firstOn the 405.7608#, a three-second press of + and - together locks the panel; LOC flashes and then stays lit. That is a panel lock rather than an error, and the oven door stays free.
Owner checks firstHold both pads again for three seconds and the panel unlocks; OPN flashes, and the pads work once the flashing stops. It simply confirms the unlock.
Owner checks firstSAbb is Sabbath mode on the Kenmore electric range 982.9684#. This is a chosen setting and not a failure. Press Settings repeatedly until SAbb shows, press 1 to choose On or Off, then press Start to save.
Owner checks firstModels made under the 2026 Curtis International license are not covered yet. F16, F4, F11 and the other F-codes have no meaning in any Kenmore range guide we read. The five decoded range rows are quote-only, with page numbers not recorded.

The Kenmore 790 range guides give one shared step for any F code, and we decode only the display messages that the guides and notes name: Er, Hot, LOC/OPN, H and SAbb.
Models made under the 2026 Curtis International license are not covered yet. F16, F4, F11 and the other F-codes have no meaning in any Kenmore range guide we read. The five decoded range rows are quote-only, with page numbers not recorded.
Write down the full code and the model before you press CANCEL. The reset wait is 5 minutes in a 790 guide and 30 seconds in the notes for gas range 405.7608#, so each is attributed separately.
If you smell gas, do not light anything or use switches; leave and call your gas supplier from outside. Switch the breaker off before reaching behind any panel.
On the Kenmore 790 ranges, a dead-looking oven panel usually means one of four things: the oven lockout is on, the clock was never set, an F or E code stopped the control, or power is missing. Cancel the lockout first; a code needs a restart.
A Kenmore oven door that will not open is almost always the self-clean lock, which holds until the oven has cooled. Do not force it. For a door that is misaligned or has been removed, the guide gives hinge-lock steps, and the glass needs care.
On a Kenmore 790 gas cooktop, a flame that is too high, uneven or orange has a short list of causes in the guide: a knob set high, a burner cap sitting wrong, clogged ports, moisture after cleaning or an incorrect LP conversion. Check the cap and ports first.
Go by the instructions for your exact model. Check how we research these pages.
Models made under the 2026 Curtis International license are not covered yet. F16, F4, F11 and the other F-codes have no meaning in any Kenmore range guide we read. The five decoded range rows are quote-only, with page numbers not recorded.
Take a photo of the entire range display and of the model label. Note what the appliance was doing when the message came up, instead of borrowing an explanation written for a different appliance.
An old search phrase is no proof of what a code means. If our range manuals do not explain a message, we list the name as it appears and send you toward help, without blaming a part or a cause.
Open the manuals in this range library and match the models on their covers to the label on your appliance. A model that is not listed there needs its own operating instructions.