What it means
H on the Kenmore induction range 982.9685# means the cooking zone is too hot to touch. It clears by itself once the surface cools to a safe temperature. Treat it as a warning light, not a failure.
Kenmore range H / Indicator
H on the Kenmore induction range 982.9685# means the cooking zone is too hot to touch. It clears by itself once the surface cools to a safe temperature. Treat it as a warning light, not a failure.
Also shown as H
H on the Kenmore induction range 982.9685# means the cooking zone is too hot to touch. It clears by itself once the surface cools to a safe temperature. Treat it as a warning light, not a failure.
H marks a hot surface.
H stays on after the cooking zone has fully cooled.
Your checklist / stored on this device

H marks a hot surface. Wait before wiping or moving pans.

A hot pan can sit on a cooled zone, so treat pans as hot too.

H disappears when the surface has cooled down to a safe temperature.

Hot glass looks cool. The H indicator is your reminder.
If H stays on well after the zone feels cool, note it for a visit.
Give us the model and the checks you have already done, and open your request from here.
Book a visit
Simplified drawing; the real layout depends on the model. Tap an outlined part to see its photo and the check that goes with it.
The guide's indicator icons table says H means the cooking zone is too hot to touch, and that it will disappear when the surface has cooled to a safe temperature.
Read the supporting manualThe pan heats the glass by contact even though induction heats the pan. The guide only says to wait.
Read the supporting manualThe same table has other icons, such as one for an activated burner not in use and one for Boost. H is the only one about heat on the surface.
Read the supporting manualManufacturer document
Kenmore
No edition printed / PDF p.16 (Indicator Icons & Symbols)
Kenmore induction range 982.9685# (use and care guide, Indicator Icons & Symbols, p. 16).
Until the surface cools to a safe temperature. The guide gives no time, since it depends on how hot and how long the zone was used.
The guide says the cooking zone is too hot to touch, so treat the glass as hot. A pan left on the zone is hot as well.
Only the induction range 982.9685# is covered here. Gas ranges use a Hot message for the oven instead.
The same table lists an icon for a burner that is activated but not in use and one for Boost, so H is one of three symbols.
Yes, a little. If H lingers long after the zone feels cool, write it down and book a technician.
Code, symptom, part or service
SAbb is Sabbath mode on the Kenmore electric range 982.9684#. This is a chosen setting and not a failure. Press Settings repeatedly until SAbb shows, press 1 to choose On or Off, then press Start to save.
On the Kenmore 790 ranges, a dead-looking oven panel usually means one of four things: the oven lockout is on, the clock was never set, an F or E code stopped the control, or power is missing. Cancel the lockout first; a code needs a restart.
Book a diagnostic for your model, carried out at the appliance.
Office details, and the access information to pass along.