What it means
On the 405.7608# gas range, Er followed by a number or letter is a function error code. Press Cancel/Off, let the oven cool for an hour, and use it again. If Er repeats, leave the oven dark for 30 seconds or longer, then restore it.
Kenmore range Er / Function error
On the 405.7608# gas range, Er followed by a number or letter is a function error code. Press Cancel/Off, let the oven cool for an hour, and use it again. If Er repeats, leave the oven dark for 30 seconds or longer, then restore it.
Also shown as Er
On the 405.7608# gas range, Er followed by a number or letter is a function error code. Press Cancel/Off, let the oven cool for an hour, and use it again. If Er repeats, leave the oven dark for 30 seconds or longer, then restore it.
Clear the display with the Cancel/Off pad.
Er is back after both the hour of cooling and the power disconnect.
Your checklist / stored on this device

Clear the display with the Cancel/Off pad. Turn off any burner that is lit.

The guide asks for a full hour before you put the oven back into operation.

Use the breaker, or the plug if there is one, and leave the range dead for 30 seconds or more.

If you ever smell gas, the guide's safety page says to call your gas supplier at once from a neighbor's phone, and not to use the range.
If the same function error returns after the power reset, bring in a technician.
Give us the model and the checks you have already done, and open your request from here.
Book a visit
Simplified drawing; the real layout depends on the model. Tap an outlined part to see its photo and the check that goes with it.
Troubleshooting says that Er plus a flashing number or letter means a function error code, and the first action it names is the Cancel/Off pad.
Read the supporting manualThe guide instructs the oven to cool for one hour before it is put back into operation. We follow that as printed and add no reason of our own.
Read the supporting manualBoth appear in one table row with identical steps. Er shows a following number or letter, while ErrF is the whole message. A related separate row covers ignition failure and gas shutoff valves.
Read the supporting manualManufacturer document
Kenmore
No edition printed / PDF p.27 (Trouble Shooting Guide)
The 405.7608# gas range guide, p. 27, gives the Er steps. Another guide, 1403611L for 790 ranges, waits five minutes instead, so check which family you own.
The characters are not decoded. It treats Er plus a number or letter as one function error code, so note exactly what flashes and tell the technician.
The instruction is an hour of cooling, after which the oven goes back into use. It gives no reason, so we follow it as printed.
The guide speaks only to the oven. The cooktop is not part of the Er text; trouble lighting a burner is a separate matter.
A 790 slide-in gas range guide (1403611L) says to power off for five minutes. The 405.7608# guide says 30 seconds or more; match the guide to your model.
Burner ignition failure has its own row, with a check that the gas shutoff valves are open. Er is a function error.
Code, symptom, part or service
Hot appears on the 405.7608# gas range display when the oven is above 100 degrees F. A steam clean cannot start until the oven cools. It is a message, not an error.
On the Kenmore 790 ranges, a dead-looking oven panel usually means one of four things: the oven lockout is on, the clock was never set, an F or E code stopped the control, or power is missing. Cancel the lockout first; a code needs a restart.
Book a diagnostic for your model, carried out at the appliance.
Office details, and the access information to pass along.