Before work starts
After the technician has examined the appliance you are given the cost of the repair, and you decide whether to go ahead.
Independent appliance repair
We repair Kenmore gas and radiant electric cooktops: burners that will not light or burn on one side, elements that run too hot or too cool, and flames that turn orange. Give us the model and name the burner that misbehaves, then book a technician.


If a Kenmore Elite gas burner stays dark, push in the knob and rotate fully to LITE until it ignites, then set the flame. After that, confirm the gas valve is open, the burner sits straight in its support, the ports are clear and, on electric ignition models, the cord is in.

For a Kenmore radiant cooktop, the guide names a blown fuse or breaker trip, an outage, a heat setting too low, the wrong control for the element, incorrect voltage, and lightweight or warped pans. Raise the setting a little and use flat, medium or heavy cookware.
We have not researched code meanings for this appliance. Use its model manual, and attach a photo of the display to your request.
See the research statusWe name no cooktop parts ahead of time. Once the cause is found at your home, the right part is matched to your model number and fitted only after you agree to the price.

There is no illustrated glossary entry for this component yet. Rely on the system named in the explanation and the cited model manual; a code alone does not point to a replacement.
Explore the researched partsWhat happens after you book.
Model number first.

Type in the number from the label, along with what the appliance does. A photo of the label works too.

The technician reads the code against your model, finds the failed part and gives you a cost before starting.

The new part goes in, the cycle is tested, and you hear what was done.
Both gas cooktop guides forbid striking a flame, flipping a switch or phoning from inside the house. Go outside and contact the gas company from a neighbor's place, or the fire service when nobody answers.
A burner needs its knob pressed down and rotated all the way to LITE until it catches, then backed off to the flame you want. The gas supply valve has to be open too.
With the burner switched off, poke clogged ports and slots clear using a fine wire or needle. An open burner must also sit straight in its support, because the gas-air mix needs an unbroken path.
If the cord is out of the outlet there is no spark. In an outage, models with electric ignition can be lit manually, as the guide's Setting Surface Controls section explains.
A flame that burns only half way round can be moisture or clogged ports. Fan it lightly and let it run until the flame fills. An orange flame is dust or, near the coast, salt air.
On a radiant cooktop, use the knob for that element and flat, evenly weighted medium or heavy pans. Light or warped pans heat unevenly and food burns easily.
A burner will not light once the knob, supply valve, ports and cap have been checked.
A flame stays uneven or orange after the burner dries and the ports are clear.
A radiant element stays cold or gets hot at every setting while the correct knob is in use.
The marks on a ceramic top will not come off with the recommended cream.
Gas connections and wiring are the technician's alone. The moment you notice gas, exit the house first.
Arrange a diagnosticAfter the technician has examined the appliance you are given the cost of the repair, and you decide whether to go ahead.
Covered repairs under a Kenmore manufacturer warranty are handled through Kenmore. We stand behind our own work with a workmanship warranty.
Gas cooktops and radiant electric cooktops, including models with a ceramic-glass top. Read us the model number printed beneath the cooktop.
Often the ports are clogged or the cap sits crooked. Free the ports while the burner is cold, set the cap level, then press and rotate the knob to LITE. Book us if it stays dark.
The guide calls a slightly orange flame unavoidable in coastal areas because of salt air. Dust in the line can do it for a few minutes. A flame that stays orange needs a technician.
On electric-ignition models the guide says burners can be lit manually during an outage. Follow its Setting Surface Controls steps and keep the area clear of anything that burns.
The cooktop guides we read print none. Tell us what the burner or element does, and the model number, and we take it from there.
Code, symptom, part or service
If a Kenmore Elite gas burner stays dark, push in the knob and rotate fully to LITE until it ignites, then set the flame. After that, confirm the gas valve is open, the burner sits straight in its support, the ports are clear and, on electric ignition models, the cord is in.
Book a diagnostic for your model, carried out at the appliance.
Office details, and the access information to pass along.