Kenmore washer F02 / Drain

Kenmore washer
error F02

Washer / display reference

F02 is printed as Drain Problem in the Kenmore 110.4292, 4492 and 4493 front-load guide. Cancel with PAUSE/CANCEL twice, unplug the washer and examine the drain hose for kinks, ice, clogs and a height over 96 inches. After that, reconnect, select the cycle once more and press START.

Also shown as F02

Last reviewed

Washer / display reference
Meaning
F02 is printed as Drain Problem in the Kenmore 110.4292, 4492 and 4493 front-load guide. Cancel with PAUSE/CANCEL twice, unplug the washer and examine the drain hose for kinks, ice, clogs and a height over 96 inches. After that, reconnect, select the cycle once more and press START.
Who handles it
Owner checks first, then a technician
Related codes
Source
Use & Care Guide, Kenmore front-load washers 110.4292/4492/4493

What Kenmore washer F02 means.

What it means

F02 is printed as Drain Problem in the Kenmore 110.4292, 4492 and 4493 front-load guide. Cancel with PAUSE/CANCEL twice, unplug the washer and examine the drain hose for kinks, ice, clogs and a height over 96 inches. After that, reconnect, select the cycle once more and press START.

What you can safely check

This cancels the cycle, as the 4292 guide specifies.

When to call a technician

F02 is back after the hose check and a restart.

Your checklist / stored on this device

Safe checks, in order.

0 of 5 checks done
  1. Kenmore washer F02: Gloved hand turning the round drain pump filter cap behind the open lower access flap of a front-load washer, with a baking pan and towel on the floor
    Illustration. Follow your model’s instructions.
    Before you begin

    Press PAUSE/CANCEL twice

    This cancels the cycle, as the 4292 guide specifies.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Unplug the washer

    Remove power before checking anything. There may still be water in the drum.

  3. A worn rating label on the rim of an older top-load washer
    Illustration. Follow your model’s instructions.
    Check 3

    Check the drain hose

    Look for kinks, ice and clogs, and keep the hose end under the 96-inch (2.4 m) limit.

  4. Over the shoulder of a technician in a navy shirt holding a tablet with a blank checklist, a white washer behind him.
    Illustration. Follow your model’s instructions.
    Check 4

    Reconnect and restart

    Plug in, choose the cycle once more and press START.

  5. A technician with a washer drain pump in hand
    Illustration. Follow your model’s instructions.
    Check 5

    Book a visit if F02 returns

    A repeat after these checks goes beyond the guide.

Still showing F02?

Give us the model and the checks you have already done, and open your request from here.

Book a visit

The washer drain path.

Conceptual Washer sectionPump filterDrain pumpDrain hoseHousehold drain1234
  1. 2Drain pump
  2. 3Drain hose
  3. 4Household drain

Simplified drawing; the real layout depends on the model. Tap an outlined part to see its photo and the check that goes with it.

Parts behind the message.

Round white washer drain pump filter with a few lint strands and a loose gray button beside it on a wooden workbench.

Component reference

Washer drain pump filter

The 796 front-load washer has a drain pump filter behind a small access panel.

Read the definition

A little more context.

What does F02 mean here?

The troubleshooting list prints F02 as Drain Problem, with checks for a kinked, frozen or clogged hose and a hose end that is too high.

Read the supporting manual

Is F02 a user-interface code?

None of the Kenmore guides checked say so. Some web pages give F02 that meaning on other washers. This family prints it as a drain message.

Read the supporting manual

How is F02 related to F21?

They are the same Drain Problem message printed on different front-load families. F21 appears on the 4708 and 4709, F02 on the 4292 family.

Read the supporting manual

The manual behind the message.

Manufacturer document

Use & Care Guide, Kenmore front-load washers 110.4292/4492/4493

Kenmore (guide as published by Sears / Transform SR Brands)

Doc L0409348 / PDF p.19 (F02)

Kenmore 110.4292, 4492 and 4493 front-load washers, guide L0409348, p. 19; cross-checked with the 4708 guide.

Here to help

Good questions.
Clear answers.

Talk to our team
What cancels the cycle here?

Press PAUSE/CANCEL twice. The 4292 family uses PAUSE/CANCEL where the 4708 family uses STOP.

What is the 96-inch rule?

The hose end must not be too high; 96 inches is the limit. A hose end that high is one possible cause.

Is F02 the same on all Kenmore washers?

No. On the 4292 family this guide reads F02 as a drain problem. Other washers use F02 for other things, which we do not apply here.

Can ice block the drain hose?

The guide asks whether the drain hose is frozen, so yes, in a cold garage or porch.

What if the drain looks fine?

Plug in, pick the cycle and start it. If F02 returns, book a technician.

Let’s take care of it.

Still going after all these years.
Let’s keep it that way.