Kenmore washer OE / Drain

Kenmore washer
error OE

Washer / display referenceOE

OE is the 796 Kenmore message for water that drains slowly, or not at all. Inspect the drain hose for kinks and clogs, clean the drain pump filter, and keep the discharge at 96 inches (244 cm) or less above the bottom of the washer. The top-load guide also lists a drain pump that failed.

Also shown as OE

Last reviewed

Washer / display referenceOE
Meaning
OE is the 796 Kenmore message for water that drains slowly, or not at all. Inspect the drain hose for kinks and clogs, clean the drain pump filter, and keep the discharge at 96 inches (244 cm) or less above the bottom of the washer. The top-load guide also lists a drain pump that failed.
Who handles it
Owner checks first, then a technician
Related codes
Source
Use & Care Guide, Kenmore front-load washers 796.4136/4146/4156

What Kenmore washer OE means.

What it means

OE is the 796 Kenmore message for water that drains slowly, or not at all. Inspect the drain hose for kinks and clogs, clean the drain pump filter, and keep the discharge at 96 inches (244 cm) or less above the bottom of the washer. The top-load guide also lists a drain pump that failed.

What you can safely check

Check behind and under the washer for pinches, kinks and clogs.

When to call a technician

OE returns, or the top-load guide's failed drain pump line applies.

Your checklist / stored on this device

Safe checks, in order.

0 of 5 checks done
  1. Kenmore washer OE: Gloved hand turning the round drain pump filter cap behind the open lower access flap of a front-load washer, with a baking pan and towel on the floor
    Illustration. Follow your model’s instructions.
    Before you begin

    Look along the drain hose

    Check behind and under the washer for pinches, kinks and clogs.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Clean the drain pump filter

    The Care and Cleaning section explains how. Have a towel ready for water.

  3. A worn rating label on the rim of an older top-load washer
    Illustration. Follow your model’s instructions.
    Check 3

    Check the discharge height

    The guide gives 96 inches (244 cm) as the maximum.

  4. Over the shoulder of a technician in a navy shirt holding a tablet with a blank checklist, a white washer behind him.
    Illustration. Follow your model’s instructions.
    Check 4

    Rerun a drain and spin

    See whether the tub empties.

  5. A technician with a washer drain pump in hand
    Illustration. Follow your model’s instructions.
    Check 5

    Book a visit

    On the top-load, a failed drain pump is a call-for-service item.

Still showing OE?

Give us the model and the checks you have already done, and open your request from here.

Book a visit

The washer drain path.

Conceptual Washer sectionPump filterDrain pumpDrain hoseHousehold drain1234
  1. 2Drain pump
  2. 3Drain hose
  3. 4Household drain

Simplified drawing; the real layout depends on the model. Tap an outlined part to see its photo and the check that goes with it.

Parts behind the message.

Round white washer drain pump filter with a few lint strands and a loose gray button beside it on a wooden workbench.

Component reference

Washer drain pump filter

The 796 front-load washer has a drain pump filter behind a small access panel.

Read the definition

A little more context.

What does OE mean?

The guides pair OE with the problem water in the washer drains slowly or not at all. The listed causes are the hose, the pump filter and the discharge height.

Read the supporting manual

How is OE different from Ld and F21?

Ld is the Calypso and F21 the 110 front-load drain message. OE is the 796 one.

Read the supporting manual

The manual behind the message.

Manufacturer document

Use & Care Guide, Kenmore front-load washers 796.4136/4146/4156

Kenmore (guide as published by Sears / Transform SR Brands)

Doc 1909134L / P/N MFL68005592 (Transform SR Brands) / PDF p.46

Manufacturer document

Use & Care Guide, Kenmore front-load washer 796.4198

Kenmore (guide as published by Sears / Transform SR Brands)

Doc 1807405L / P/N MFL68005554 / PDF p.31

Manufacturer document

Use & Care Guide, Kenmore top-load washer 796.2927

Kenmore (guide as published by Sears / Transform SR Brands)

Doc 1007244L / P/N MFL42065471 / PDF p.27

From the 796 front-load guide (1909134L) and the 796 top-load guide (1007244L).

Here to help

Good questions.
Clear answers.

Talk to our team
Where do I find the drain pump filter?

The guide points to its Care and Cleaning section. Have towels ready, since water may be in the filter.

What drain height is allowed?

Up to 96 inches (244 cm) above the bottom of the washer.

Is a failed drain pump covered?

The top-load guide lists drain pump failed with the remedy call for service.

Is OE the same as Ld?

No. Ld is the Calypso message. OE is for 796 washers.

When should I call?

When the hose and filter are clear and OE returns.

Let’s take care of it.

Still going after all these years.
Let’s keep it that way.