What it means
Sb on the display of a Kenmore 253-series freezer means the control is in Sabbath mode, which is a setting rather than an error. The guide says to press the MODE key and the CONTROL LOCK key together for 3 seconds to leave it.
Kenmore freezer Sb / Mode
Sb on the display of a Kenmore 253-series freezer means the control is in Sabbath mode, which is a setting rather than an error. The guide says to press the MODE key and the CONTROL LOCK key together for 3 seconds to leave it.
Also shown as Sb
Sb on the display of a Kenmore 253-series freezer means the control is in Sabbath mode, which is a setting rather than an error. The guide says to press the MODE key and the CONTROL LOCK key together for 3 seconds to leave it.
Confirm the display shows Sb rather than a number.
Sb stays on after MODE and CONTROL LOCK are held together for 3 seconds.
Your checklist / stored on this device

Confirm the display shows Sb rather than a number. A mode letter pair is not a temperature.

Hold both keys together for 3 seconds, as the guide says.

Once Sb clears, the normal temperature should return to the display.
Because the guide files Sb under a too-warm freezer, also look at the temperature control and how often the door was opened.
Give us the model and the checks you have already done, and open your request from here.
Book a visit
Simplified drawing; the real layout depends on the model. Tap an outlined part to see its photo and the check that goes with it.
The Before You Call table puts a control in Sabbath mode, with Sb on the display, among the causes of a freezer that seems too warm. The table is troubleshooting, not a claim that Sabbath mode warms the freezer.
Read the supporting manualThe guide gives only the exit step for this freezer and says nothing about what the mode changes, so check your own manual for details.
Read the supporting manualBoth are modes. Express Chill makes the interior colder and is left through the options menu. Sb is Sabbath mode, and it ends with the MODE and CONTROL LOCK press.
Read the supporting manualManufacturer document
Kenmore
P/N A01062001 (1408) / PDF p.15 (Before You Call, temperature too warm)
Guide A01062001 for the 253 series; Sb is in the warm-freezer row on p. 15.
In its warm-freezer table the guide lists a control in Sabbath mode, shown as Sb, as one cause. That is its troubleshooting position, not a statement about what the mode does.
Press the MODE key and the CONTROL LOCK key together for 3 seconds. You should then see the usual temperature reading.
No. Express Chill makes the interior colder and is left through the options menu. Sb is Sabbath mode and has its own key press.
Nothing in the guide suggests that. It lists Sb as a mode, so the first move is to leave it and read the temperature.
When Sb remains after holding MODE and CONTROL LOCK for the full 3 seconds, or the freezer stays warm once the mode is off.
Code, symptom, part or service
Temp Alarm on a Kenmore 253-series freezer warns when the inside temperature reaches an unsafe level. It runs on household electricity and will not work during a power cut. Press the set button next to ALARM OFF, or any key, to silence it.
When a Kenmore freezer does not run, the guide lists five causes: a GFCI-protected circuit, the temperature control in OFF, a loose plug, a blown fuse, a breaker that has tripped, and a power outage. The green Power light tells you whether the freezer has power.
Book a diagnostic for your model, carried out at the appliance.
Office details, and the access information to pass along.