Before work starts
After the technician has examined the appliance you are given the cost of the repair, and you decide whether to go ahead.
Independent appliance repair
We repair Kenmore freezers already in homes: units that warm up, frost up or run constantly. Tell us the model number, what the temperature reads and when it began, then book a visit. We have no Kenmore freezer guide on file, so this page leans on the refrigerator-freezer guide.


When a Kenmore freezer does not run, the guide lists five causes: a GFCI-protected circuit, the temperature control in OFF, a loose plug, a blown fuse, a breaker that has tripped, and a power outage. The green Power light tells you whether the freezer has power.

For a freezer that is too warm, the guide points to the control set too warm, a lid opened often, a lid not seating, a large warm load, or a recent disconnect. Turn the control and allow several hours. Cool-down is 4 hours on the chest freezers and 24 hours on the 253 series.
No other dishwasher code we have researched is linked to this topic. Compare the exact message with your model manual and do not swap in another code from the library.
See the research statusWe don’t quote parts up front. The technician names any part after the diagnostic and matches it to your exact model number before anything is replaced.

There is no illustrated glossary entry for this component yet. Rely on the system named in the explanation and the cited model manual; a code alone does not point to a replacement.
Explore the researched partsWhat happens after you book.
Model number first.

Type in the number from the label, along with what the appliance does. A photo of the label works too.

The technician reads the code against your model, finds the failed part and gives you a cost before starting.

The new part goes in, the cycle is tested, and you hear what was done.
The 795 guide lists a door that is not closing correctly and doors opened often as causes of warm temperatures and frost.
If the freezer is too cold or warm, the guide says to adjust the control one increment at a time and wait for the temperature to stabilize. It names 0°F as the setting for normal ice production.
The guide says not to run the unit above 110°F or below 55°F.
After a reset, a unit may need up to 24 hours to settle.
Some frost inside sealed food packages is normal, and the unit may warm slightly during defrost.
Book a visit if the freezer stays warm 24 hours after the door, location and setting checks.
Book a visit if frost builds up quickly or food thaws.
Arrange a diagnosticAfter the technician has examined the appliance you are given the cost of the repair, and you decide whether to go ahead.
Covered repairs under a Kenmore manufacturer warranty are handled through Kenmore. We stand behind our own work with a workmanship warranty.
Yes, we book Kenmore freezers of both kinds. We hold no Kenmore freezer guide, so give us the model number when you book.
In the refrigerator-freezer guide, causes include a new install, doors opened often, a door not closing, a hot location and warm food added. Check those and book.
The freezer rows we hold are modes and alarms, not decoded codes. The Kenmore guides we hold print no freezer code table. Tell us what you see.
Some frost inside sealed packages is normal per the guide. Frost outside packages points to door openings or a door that does not close.
A repair that falls under the manufacturer’s warranty is handled by the manufacturer. For anything else, book a visit with us and we agree the price before we begin.
Code, symptom, part or service
When a Kenmore freezer does not run, the guide lists five causes: a GFCI-protected circuit, the temperature control in OFF, a loose plug, a blown fuse, a breaker that has tripped, and a power outage. The green Power light tells you whether the freezer has power.
Book a diagnostic for your model, carried out at the appliance.
Office details, and the access information to pass along.