Kenmore dishwasher F1E2 / Dishwasher

Kenmore dishwasher
error F1E2

We found no printed meaning for F1E2 in Kenmore's Ultra Wash 665 dishwasher guide, which lists a blink rule and no code table. Close the door and press START/RESUME; if other lights keep blinking, arrange a technician.

Not printed in the Kenmore guides we read

Last reviewed

F1E2
Dishwasher
Manual evidence

What the manual says about Kenmore dishwasher F1E2.

Manual evidence

The Ultra Wash 665.1335 guide (2006049L) prints no F#E# code and no numeric code, so it does not define F1E2. On p.20 it says that if Start/Resume blinks you should close the door and press START/RESUME, and that if lights other than Start/Resume blink and the unit will not run, you need to call for service. P.21 adds that a blinking Sanitized light means the load is not sanitized.

Safe first steps.

  1. 1

    Close the door and press START/RESUME

    Or press START/RESUME and close the door within 3 seconds. This is the guide's answer to a blinking Start/Resume light.

  2. 2

    Count the blinking lights

    Note which lights blink and how often. The guide does not decode them, but the pattern helps when you book.

  3. 3

    Run hot water first if it fills cold

    The guide suggests running hot water at a faucet near the dishwasher before selecting a cycle.

Jot these down before you call us.

Dishwashers in a thoughtfully designed home
  • Model and serial number
  • Full display text
  • When the message appears
  • What you have tried so far

When to call.

Lights other than Start/Resume blink and the dishwasher will not run, or the blinking continues after you close the door and press START/RESUME.

Book a visit(844) 788-0138

The documents we checked.

Source 1

Use & Care Guide, Kenmore Ultra Wash dishwasher 665.1335

Kenmore (guide as published by Sears / Transform SR Brands) / Doc 2006049L / P/N W11410507A / PDF pp.20-21 (blinking lights)

Here to help

Good questions.
Clear answers.

Talk to our team
Does Kenmore say what F1E2 means on a dishwasher?

No. The Kenmore Ultra Wash 665.1335 guide prints no F#E# code, so F1E2 has no defined meaning there.

F1E2 is on the display: what do I try first?

Close the door and press START/RESUME, or press it and close the door within 3 seconds. Note which lights blink and how often; the guide does not decode them, but the pattern helps when you book.

Is F1E2 the same as F1E1?

We cannot say. The guide prints neither, so each has its own page and none borrows from a neighbor. Count the blinks on your own display before assuming a match.

At what point is a visit worth booking for F1E2?

Arrange a technician when lights other than Start/Resume blink and the dishwasher will not run, or when F1E2 continues after you close the door and press START/RESUME.

Let’s take care of it.

Still going after all these years.
Let’s keep it that way.