Inside the appliance

Range meat probe. In plain English.

The meat probe is a temperature sensor on a cable that plugs into a receptacle on the left front wall of the oven cavity. The Kenmore Elite range guides say to use only the probe supplied, insert it before preheating and never store it inside the oven. The display shows the probe temperature once it is correctly plugged in.

Last reviewed

Roast with a meat probe inserted in a pan in an open oven, its braided cable running to a socket on the side wall
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Range meat probe in the appliance

The receptacle is on the left front side wall inside the oven cavity; the probe cable plugs into it.

The picture shows the type of component. It does not pick out a replacement that fits your model.

Owner care, within the model instructions.

Switch the appliance off and unplug it before any owner check. Be careful around standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or go past what your model’s owner instructions allow.

  1. 1

    Use the original probe

    Both guides say any other probe may damage the probe, the receptacle or the appliance.

  2. 2

    Plug it in with the oven cool

    Insert the probe in the food and the oven receptacle before you start cooking. The control detects a correctly seated probe and shows its temperature.

  3. 3

    Handle the cable gently

    Do not pull the cable with tongs or leave the probe in the oven when not in use. Unplug it with a pot holder after cooking.

  4. 4

    Place the tip in the food

    The tip should rest in the center of the thickest part and not touch bone, fat, gristle or the pan. Defrost food fully first.

Cleaning or replacement?

Leave internal testing to a technician.

Book a visit if the control does not show the probe temperature with the probe fully plugged in.

Book a visit if the cable is cut, kinked or burned, or the receptacle is loose or scorched.

Book a visit when the oven stops responding or beeps an F code with the probe in place.

Arrange a diagnostic

Sources and model boundaries.

These sources back up the Range meat probe guidance. Read the manual that fits your model.

  • Use & Care Guide, Kenmore Elite dual-fuel slide-in range 790.4103/4104
  • Use & Care Guide, Kenmore Elite gas slide-in range 790.4260/4261
  • Use & Care Guide, Kenmore Elite electric wall oven 790.481x series

Go by the instructions for your exact model. Check how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Where does the probe plug in?

The 790.4103 guide says into the receptacle on the left front side of the oven cavity.

Can the probe stay in the oven?

No. Both guides say the probe must never be left or stored inside the oven between uses.

Can I use the probe with Broil or self-clean?

The 790.4103 guide says you may use it with some bake features but it cannot be set with Broil or Flex-Clean.

Can I use a different probe?

No. The guides say to use only the probe supplied with the appliance, since another one can damage the probe or the receptacle.

Let’s take care of it.

Still going after all these years.
Let’s keep it that way.