What it means
F21 is printed as Drain Problem on Kenmore 110.4708 and 4709 front-loaders. STOP twice, then unplug and ask four things of the drain hose: kinked, frozen, clogged, or higher than 96 inches? Reconnect and restart afterward.
Kenmore washer F21 / Drain
F21 is printed as Drain Problem on Kenmore 110.4708 and 4709 front-loaders. STOP twice, then unplug and ask four things of the drain hose: kinked, frozen, clogged, or higher than 96 inches? Reconnect and restart afterward.
Also shown as F21
F21 is printed as Drain Problem on Kenmore 110.4708 and 4709 front-loaders. STOP twice, then unplug and ask four things of the drain hose: kinked, frozen, clogged, or higher than 96 inches? Reconnect and restart afterward.
This cancels the cycle.
F21 comes back once the hose is checked and the cycle restarted.
Your checklist / stored on this device

This cancels the cycle.

Dry your hands before touching the plug.

Kinked, frozen, clogged, or end above 96 inches (2.4 m)? Those are the guide's four drain questions.

Then press START to see whether it drains.

Still failing? The guide then points to service.
Give us the model and the checks you have already done, and open your request from here.
Book a visitSimplified drawing; the real layout depends on the model. Tap an outlined part to see its photo and the check that goes with it.

Component reference
The 796 front-load washer has a drain pump filter behind a small access panel.
Read the definitionThe guide prints F21 as Drain Problem and lists four checks, all about the drain hose.
Read the supporting manualHose height over 96 inches (2.4 m) is also on its list.
Read the supporting manualF22 is the front door lock message on the same guide page. F21 is about draining.
Read the supporting manualManufacturer document
Kenmore (guide as published by Sears / Transform SR Brands)
Doc L0809415 / P/N 8183014B / PDF p.22 (F21)
Guide L0809415, p. 22, for the 110.4708 and 4709.
Kinked, frozen, clogged, or too high at 96 inches (2.4 m).
No. The guide has you select STOP twice, then cut power, before anything else.
The guide does not say. Its steps concern the hose.
OE is the 796 message for slow draining. F21 is the 110 front-load version with its own steps.
Service is the next step it gives. Book a visit and say you cleared the hose.
Code, symptom, part or service
Ld (Long Drain) is the Calypso's slow-drain message. The guide asks if the drain hose is kinked or clogged and says STOP/CANCEL clears the display. The 110 front-loaders print F21 and F02 for a drain problem instead.
Start with what the display and the lid or door say. A Kenmore washer will not spin until the lid or door is latched, and an out-of-balance load, a slow drain or too many suds can each hold the spin back. Rebalance, check the drain, then book a visit.
The 796 front-load washer has a drain pump filter behind a small access panel. It catches lint, buttons, keys and coins before they reach the pump. When the washer drains slowly or not at all, the guide’s list starts with the drain hose and then this filter.
Book a diagnostic for your model, carried out at the appliance.
Office details, and the access information to pass along.