Inside the appliance

Freezer defrost drain plug. In plain English.

Chest freezers have a defrost drain with a plug on the front and a hole inside the bottom corner so melt water can run out. Kenmore’s guides say to defrost when 1/4 to 1/2 inch of frost builds up, unplug the freezer first and put the plugs back afterward, because an open drain lets warm air in.

Last reviewed

White chest freezer front corner with the drain plug pulled out on its tether and water running into a metal pan
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Freezer defrost drain plug in the appliance

On a chest freezer, one plug sits in the outside drain outlet at the front, and the other at the inside bottom left front corner.

The picture shows the type of component. It does not pick out a replacement that fits your model.

Owner care, within the model instructions.

Switch the appliance off and unplug it before any owner check. Be careful around standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or go past what your model’s owner instructions allow.

  1. 1

    Unplug first

    The chest guide says the freezer must be unplugged from power during defrosting to avoid an electrical hazard.

  2. 2

    Set the drain up

    Place a shallow pan under the outlet, pull the plug forward to expose the hole and rotate it so the hole faces straight down. Check the pan so it does not overflow.

  3. 3

    Use a plastic scraper only

    Never use a metal tool on frost. Metal can puncture the refrigerant tubing behind the walls, the guide cautions.

  4. 4

    Replace the plugs

    Put both drain plugs back when defrosting and cleaning are done. If the drain is left open, warm air may enter the freezer.

Cleaning or replacement?

Leave internal testing to a technician.

Book a visit when water keeps seeping from the drain after the plugs are fully seated.

Book a visit if a plug is cracked or missing and the freezer is icing near the drain.

Book a visit if you suspect refrigerant tubing damage from a sharp tool. Do not use the freezer until it is checked.

Arrange a diagnostic

Sources and model boundaries.

These sources back up the Freezer defrost drain plug guidance. Read the manual that fits your model.

  • Use & Care Guide, Kenmore chest freezers 111.17142 / 111.17182
  • Use & Care Guide, Kenmore 253-series freezers

Go by the instructions for your exact model. Check how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
When should I defrost?

The 111.17142 guide says when 1/4 to 1/2 inch of frost has built up, and that frost forms faster at the top because warm moist air enters when the lid opens.

Can I drain it to a floor drain?

The 253-series guide says a 1/2 inch garden hose adapter can be used, and one can be bought at most hardware stores if yours lacks it.

Why does warm air come in at the drain?

The guides say the drain plugs must be replaced after defrosting. A plug left open lets warm air into the freezer.

Can I chip the ice off?

Not with metal. The guide says soft frost can be removed with the included plastic scraper and warns metal tools can damage the refrigerant tubing.

Let’s take care of it.

Still going after all these years.
Let’s keep it that way.