Inside the appliance
Dryer moisture sensor. In plain English.
Some Kenmore dryers have a sensor that reads how damp the clothes are. The 796 guide says Auto Dry cycles use it to adjust drying time, and that light items mixed with heavy ones can fool it because the light items dry first. Your own guide says whether your model has one.

Where it fits.
Dryer moisture sensor in the appliance
The guides don’t locate it. It is not described as owner-serviceable.
The picture shows the type of component. It does not pick out a replacement that fits your model.
What you notice when this system needs attention.
Dryer moisture sensor concerns can show up together with weaker performance or a code that keeps returning. Testing is required before deciding whether the component is to blame.

Kenmore dryer takes too long
Long drying on a Kenmore dryer usually traces back to airflow: a clogged lint screen, a crushed or lint-packed exhaust vent, or a vent run that is too long. The guides give a quick test with your hand under the outside hood.

Kenmore dryer temperature problems
A Kenmore dryer that runs too hot, too cool or without heat is covered by three kinds of check in the guides: airflow, the household power supply, and a sensor message. Clear the lint and vent first, then check breakers and the gas valve on gas models.
Owner care, within the model instructions.
Switch the appliance off and unplug it before any owner check. Be careful around standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or go past what your model’s owner instructions allow.
- 1
Sort by weight
The 796 guide says to separate heavy items from lightweight items. Larger, heavier items take longer to dry, and a light piece can fool the sensor.
- 2
Check the lint filter and vent
The same guide lists a dirty lint filter and a restricted exhaust system when drying takes too long.
- 3
Try Timed Dry
Several of the Elite HE guide’s checks, including no heat and will not run, end with selecting a Timed Dry heated cycle and restarting. That shows whether the drum and heat run.
- 4
Note the cycle
Write down which cycle you picked and whether it ended early or late.
Cleaning or replacement?
Leave internal testing to a technician.
Book a visit if Auto Dry keeps ending clothes damp after the filter and vent are clear.
Book a visit if Timed Dry heats but Auto Dry never ends correctly.
Arrange a diagnosticSources and model boundaries.
These sources back up the Dryer moisture sensor guidance. Read the manual that fits your model.
- Use & Care Guide, Kenmore dryers 796.8128/9128/8118/9118
- Use & Care Guide, Kenmore Elite HE dryer 110.8772
Go by the instructions for your exact model. Check how we research these pages.
How does the sensor work?
The 796 guide says Auto Dry cycles use a sensor that detects moisture in the clothes and adjusts drying time. It doesn’t describe the sensor itself.
Why does Auto Dry stop early?
The 796 guide says a light item in a heavy load can fool the sensor, because the light item dries faster. Sorting the load is its first step.
Does every Kenmore dryer have one?
Not necessarily. The guides don’t say. Look for Auto Dry cycles in your own Use & Care guide.
Does cleaning the sensor help?
The guides we read give no cleaning step for the sensor. Keep the lint filter clean, since the guides name it first when drying goes wrong.
Code, symptom, part or service
Link the message to what comes next.
Kenmore dryer takes too long
Long drying on a Kenmore dryer usually traces back to airflow: a clogged lint screen, a crushed or lint-packed exhaust vent, or a vent run that is too long. The guides give a quick test with your hand under the outside hood.
Dryer lint filter
The lint filter is the screen that catches lint before it reaches the exhaust. Kenmore’s dryer guides say to empty it before every load, and the Elite HE guide lists a clogged lint screen first when clothes dry slowly or the load comes out hot. The 796 guide adds a periodic wash.
Dryer repair
Book a diagnostic for your model, carried out at the appliance.
Find your metro
Office details, and the access information to pass along.

