Inside the appliance

Gas oven glow bar igniter. In plain English.

A gas Kenmore wall oven lights its bake burner with a glow bar igniter. When the oven is turned on the igniter heats and, in less than a minute, gas flows to the burner and ignites. It glows bright orange when hot and cycles with the thermostat. The guide says never to light the oven burner during a power failure.

Last reviewed

Inside the bottom of a gas oven, a ceramic glow bar igniter glowing orange beside the perforated burner tube
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Gas oven glow bar igniter in the appliance

The guide’s features page shows the gas burner in the oven. The igniter is part of that burner assembly, and the guide gives no owner access steps.

The picture shows the type of component. It does not pick out a replacement that fits your model.

Owner care, within the model instructions.

Switch the appliance off and unplug it before any owner check. Be careful around standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or go past what your model’s owner instructions allow.

  1. 1

    Know the sequence

    The igniter glows first, then the gas opens. Give a gas oven under a minute before deciding it is not lighting.

  2. 2

    Check power and gas

    The guide lists an unplugged cord, a power outage, a tripped breaker and a closed gas shut-off valve as reasons the entire oven does not operate.

  3. 3

    After a power failure

    Turn the temperature knob to OFF, then back to the setting when power returns. The burner valves will not open during an outage.

  4. 4

    Do not force a light

    Do not try to light the oven burners during a power failure. The guide warns the valves stay closed.

Cleaning or replacement?

Leave internal testing to a technician.

If you smell gas, leave the area without touching switches, call the gas utility, then book a visit.

Book a visit if the igniter glows but the burner never lights, or it never glows.

Book a visit when the oven takes a long time to light or the flame is uneven.

Arrange a diagnostic

Sources and model boundaries.

These sources back up the Gas oven glow bar igniter guidance. Read the manual that fits your model.

  • Use & Care Guide, Kenmore gas built-in wall oven 790.3017, 790.3047

Go by the instructions for your exact model. Check how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
How long does a gas oven take to light?

The guide says less than 1 minute after the glow bar is hot enough. It glows bright orange and cycles with the thermostat.

Can I light the oven by hand in an outage?

No. The guide says not to attempt to light the oven burners during a power failure, because the burner valves will not open.

What else stops the whole oven?

The guide lists the plug, a power outage, a tripped breaker, an incomplete service wiring and a gas supply shut-off valve that is closed.

Is the igniter a part I can swap?

We do not recommend it. The guide does not give owner replacement steps, and the work involves gas and electrical connections.

Let’s take care of it.

Still going after all these years.
Let’s keep it that way.