Inside the appliance

Dishwasher rinse aid dispenser. In plain English.

The rinse aid dispenser is a small reservoir with a twist-off cap that releases liquid rinse aid in the final rinse. The Kenmore 665.1335 guide holds 5 oz, which lasts 1 to 3 months, and calls rinse aid essential for drying. It has an adjustable setting that ships at 2.

Last reviewed

Dishwasher door interior with an open detergent cup beside a blue fill indicator window and a round rinse aid cap
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Dishwasher rinse aid dispenser in the appliance

The Parts and Features page (PDF p.6) lists it. The fill cap turns a quarter turn counterclockwise to remove and has a level indicator.

The picture shows the type of component. It does not pick out a replacement that fits your model.

Owner care, within the model instructions.

Switch the appliance off and unplug it before any owner check. Be careful around standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or go past what your model’s owner instructions allow.

  1. 1

    Check the level

    Open the door fully and read the indicator, because the guide says it reads the correct fill level only with the door completely open. Fill to FULL, not past it.

  2. 2

    Wipe up spills

    The guide warns that spilled rinse aid can create excessive suds. Wipe it off the door before you close it.

  3. 3

    Set the amount

    The factory setting is 2. Raise it for calcium buildup on dishware in hard water; lower it if you see foam in the tub.

  4. 4

    Pair it with Heated Dry

    The troubleshooting table says rinse aid along with the Heated Dry option is needed for proper drying.

Cleaning or replacement?

Leave internal testing to a technician.

Book a visit if the dish drying stays poor with rinse aid in, the setting adjusted and Heated Dry on.

Book a visit if the cap will not lock or rinse aid leaks from the dispenser into the tub.

Book a visit if suds keep returning after you have wiped up spills and lowered the setting.

Arrange a diagnostic

Sources and model boundaries.

These sources back up the Dishwasher rinse aid dispenser guidance. Read the manual that fits your model.

  • Use & Care Guide, Kenmore Ultra Wash HE dishwasher 665.1335

Go by the instructions for your exact model. Check how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
How much rinse aid does the dispenser hold?

The Kenmore guide says 5 oz (150 mL), and that under most conditions this lasts 1 to 3 months.

How do I change the rinse aid setting?

Turn the knob a quarter turn counterclockwise and remove it, turn the arrow inside to the setting you want, then refit the knob and turn it to LOCK.

Why are my dishes wet at the end?

The guide notes that plastic and nonstick items are hard to dry, and that rinse aid plus Heated Dry is needed. Concave glass bottoms also hold water.

Is there foam from rinse aid?

Spilled rinse aid can make excessive suds, and the guide says to use a lower setting if you notice foam in the dishwasher.

Let’s take care of it.

Still going after all these years.
Let’s keep it that way.