Start from the symptom
Kenmore washer noisy.
Several loud sounds are normal on a Kenmore washer: clicking from the door lock, humming from the drain pump, spraying, splashing and a high whine at top spin. Rattling and banging are the ones to chase: look for coins, a lopsided load and a loose installation.

Start with safe observations.
Switch the appliance off and unplug it before any owner check. Be careful around standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or go past what your model’s owner instructions allow.
- 1
Compare against the normal sounds
The 796 guides list clicking (door or lid lock), humming or gurgling (drain pump), spraying or hissing, and splashing as normal. The top-load adds a waterfall sound from spinning with water.
- 2
Rattling and clanking
Stop the washer and check the drum or tub and the drain filter for coins, keys or pins. If the noise continues after a restart, the guide says to arrange service.
- 3
Thumping
Heavy loads produce some. If it continues, the load is probably out of balance, so redistribute it.
- 4
Vibrating noise
Check shipping bolts, packing material, the leveling feet and the floor. See the installation requirements in your guide.
- 5
Metal touching metal
The Calypso guide says snaps, buckles and zippers touching the basket make noise that is normal.
Systems a technician may investigate.
These parts are linked to the symptom. Noticing the symptom does not show that any single part has failed.
If the display adds a code.
No code is linked directly to this topic.
No other dishwasher code we have researched is linked to this topic. Compare the exact message with your model manual and do not swap in another code from the library.
See the research statusRead the related care guide.

Washer stops before the spin? Check how it is loaded.
A Kenmore washer stops its spin when the load sits unevenly. Load loosely, mix large and small items, never wash one heavy item alone, and keep the drum from being packed tight. If the washer pauses with an imbalance message, redistribute the load and restart.

Musty front-load washer? Three monthly tasks fix most of it.
Each month, wipe the door seal with the diluted bleach mix, empty the drain pump filter, and leave the door ajar between loads. Check the two inlet filters when the washer fills slowly. All three tasks are in the 796 front-load guide, and each takes only a few minutes.
When observation becomes a service request.
Leave internal testing to a technician.
A grinding, squealing or banging noise continues after you have emptied the drum, cleared the drain filter and leveled the washer. Book a visit and describe when it happens.
Arrange a diagnosticSources and model boundaries.
These sources back up the Kenmore washer noisy guidance. Read the manual that fits your model.
- Use & Care Guide, Kenmore front-load washers 796.4136/4146/4156
- Use & Care Guide, Kenmore top-load washer 796.2927
- Use & Care Guide, Kenmore Calypso top-load washers 110.2206/2408/2506/2508
Go by the instructions for your exact model. Check how we research these pages.
Which washer noises are normal?
Door or lid lock clicks, drain pump humming, spraying, splashing, and on the top-load a high whine at spin. The guides list these by name.
Why is my Kenmore washer rattling?
Foreign objects in the drum, tub or pump are the first cause the guides give. Stop it, look, and clean the drain filter on front-loaders.
Is a water-sloshing sound a problem?
On the 796 top-load, a liquid in the ring above the tub is designed to balance it and can be heard when the tub stops. It is normal.
Should I keep running a noisy washer?
Not if the sound is grinding or banging. Stop it, check the basics, and book a visit if it returns.
Code, symptom, part or service
Link the message to what comes next.
Kenmore washer not spinning
Start with what the display and the lid or door say. A Kenmore washer will not spin until the lid or door is latched, and an out-of-balance load, a slow drain or too many suds can each hold the spin back. Rebalance, check the drain, then book a visit.
Washer drain pump filter
The 796 front-load washer has a drain pump filter behind a small access panel. It catches lint, buttons, keys and coins before they reach the pump. When the washer drains slowly or not at all, the guide’s list starts with the drain hose and then this filter.
Washer repair
Book a diagnostic for your model, carried out at the appliance.
Find your metro
Office details, and the access information to pass along.
