Kenmore washer FH / Water supply

Kenmore washer
error FH

Washer / display referenceFH

On Kenmore 110 front-loaders 4292, 4492 and 4493, FH is the Water Inlet Problem label: no water, or an insufficient supply. Hit PAUSE/CANCEL twice, unplug, then check faucets, screens and hoses before you reconnect and restart the cycle.

Also shown as FH

Last reviewed

Washer / display referenceFH
Meaning
On Kenmore 110 front-loaders 4292, 4492 and 4493, FH is the Water Inlet Problem label: no water, or an insufficient supply. Hit PAUSE/CANCEL twice, unplug, then check faucets, screens and hoses before you reconnect and restart the cycle.
Who handles it
Owner checks first, then a technician
Related codes
Source
Use & Care Guide, Kenmore front-load washers 110.4292/4492/4493

What Kenmore washer FH means.

What it means

On Kenmore 110 front-loaders 4292, 4492 and 4493, FH is the Water Inlet Problem label: no water, or an insufficient supply. Hit PAUSE/CANCEL twice, unplug, then check faucets, screens and hoses before you reconnect and restart the cycle.

What you can safely check

This cancels the cycle on the 4292 family.

When to call a technician

FH outlasts the supply checks.

Your checklist / stored on this device

Safe checks, in order.

0 of 5 checks done
  1. Kenmore washer FH: Hand holding a small mesh screen removed from the washer's inlet, with the detached red and blue hoses and the unplugged cord on the counter below
    Illustration. Follow your model’s instructions.
    Before you begin

    Press PAUSE/CANCEL twice

    This cancels the cycle on the 4292 family.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Cut the power

    Next, make sure the water faucets are all the way open.

  3. A worn rating label on the rim of an older top-load washer
    Illustration. Follow your model’s instructions.
    Check 3

    Check the screens and hoses

    Screens may be clogged; hoses may be bent or frozen.

  4. Over the shoulder of a technician in a navy shirt holding a tablet with a blank checklist, a white washer behind him.
    Illustration. Follow your model’s instructions.
    Check 4

    Plug in, re-select the cycle, press START

    The cycle must be chosen again.

  5. A technician with a washer drain pump in hand
    Illustration. Follow your model’s instructions.
    Check 5

    Book a visit if FH stays

    Persisting trouble means calling for service, per the guide.

Still showing FH?

Give us the model and the checks you have already done, and open your request from here.

Book a visit

Water into the washer.

Conceptual Washer sectionSupply valveInlet hoseTub inlet123
  1. 1Supply valve
  2. 3Tub inlet

Simplified drawing; the real layout depends on the model. Tap an outlined part to see its photo and the check that goes with it.

Parts behind the message.

Two small round mesh inlet screens beside a braided steel washer hose with brass couplings, on a wooden workbench.

Component reference

Washer water inlet screens

Each water valve on a Kenmore washer has a small filter screen where the hot and cold hoses connect.

Read the definition

A little more context.

What does FH mean?

It reads Water Inlet Problem, with a note that there is no water or not enough. The list is about the faucets, screens, bent hoses and frozen hoses.

Read the supporting manual

What else is in this list?

F4 to F16 are grouped as an Electrical Problem with a drain-and-spin step. They are separate from FH.

Read the supporting manual

The manual behind the message.

Manufacturer document

Use & Care Guide, Kenmore front-load washers 110.4292/4492/4493

Kenmore (guide as published by Sears / Transform SR Brands)

Doc L0409348 / PDF p.19

Kenmore 110 front-load washers 4292, 4492 and 4493, guide L0409348, p. 19.

Here to help

Good questions.
Clear answers.

Talk to our team
Is FH the same as F20?

The wording matches. FH appears on the 4292 family; F20 on the 4708 and 4709.

What are F4 to F16 in this guide?

They are grouped as an Electrical Problem with a drain-and-spin step. They are separate from FH.

How is the cycle stopped?

Press PAUSE/CANCEL twice, then unplug or disconnect power.

Could a frozen hose cause FH?

The guide lists frozen hoses among the checks.

What if FH returns?

If trouble remains after the supply checks, service comes next.

Let’s take care of it.

Still going after all these years.
Let’s keep it that way.