Start from the symptom
Kenmore ice maker ice has a bad taste, odor or looks cloudy.
Kenmore names six reasons for ice with a bad taste or odor: minerals such as sulfur in the water, a new ice maker, old ice, poorly wrapped food, a dirty refrigerator and a dirty ice bin. Throw away old ice, wash and dry the bin, and rewrap food.

Start with safe observations.
Switch the appliance off and unplug it before any owner check. Be careful around standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or go past what your model’s owner instructions allow.
- 1
Discard the first batches
After install, throw away the first few batches of ice to avoid discolored or bad-tasting ice.
- 2
Throw away old ice
Ice stored too long shrinks, turns cloudy and can taste stale. Empty the bin and make a fresh supply.
- 3
Wash the ice bin
Empty and wash the bin, discarding old cubes. It has to be completely dry before it goes back in.
- 4
Rewrap the food
Odors can move to the ice if food is not wrapped properly in either compartment.
- 5
Clean the interior
See the Care and Cleaning section of your guide.
- 6
Think about the water
Minerals such as sulfur in the supply can cause the taste. A filter may help, though it may not remove everything.
More about this symptom.
What does food storage have to do with ice?#
Odors can migrate to the ice if food is not wrapped properly in either compartment. Rewrap the food and clean the interior of the refrigerator.
How long can ice sit in the bin?#
The guide gives no number. It says old ice shrinks, becomes cloudy and may develop a stale taste, and that ice used infrequently should be replaced with a fresh supply.
What if I have done everything listed and nothing changed?#
When the bin is clean, the ice fresh, the food wrapped and the taste remains, or the ice is discolored. Do not use ice or water until the problem is corrected.
Systems a technician may investigate.
These parts are linked to the symptom. Noticing the symptom does not show that any single part has failed.

Refrigerator water filter
This cartridge treats the water on its way to the dispenser and the ice maker. Kenmore’s refrigerator guides say to replace it about every six months, when the indicator comes on, when dispenser output drops or when the ice cubes get smaller than normal.

Refrigerator ice maker
The automatic ice maker takes in water, freezes it into cubes and sends them to the bin. The Kenmore 795 guide says a new refrigerator takes 12 to 24 hours to start making ice and 72 hours to reach full output, and lists the switch, the ice sensor, the shut-off arm and the water supply as the usual checks.
If the display adds a code.
Keep the exact message.
We have not researched code meanings for this appliance. Use its model manual, and attach a photo of the display to your request.
See the research statusWhen observation becomes a service request.
Leave internal testing to a technician.
Ice tastes bad after a clean bin, fresh ice and wrapped food.
Ice is discolored after the first batches.
The water also tastes bad.
The ice stays cloudy with a new filter.
Arrange a diagnosticSources and model boundaries.
These sources back up the Kenmore ice has a bad taste, odor or looks cloudy guidance. Read the manual that fits your model.
- Use & Care Guide, Kenmore Elite bottom-freezer refrigerator 795.7802/7804/7902/7904
- Use & Care Guide, Kenmore bottom-freezer refrigerator 795.7248
Go by the instructions for your exact model. Check how we research these pages.
Why does my Kenmore ice taste stale?
Ice that has been stored too long will shrink, become cloudy and may develop a stale taste. The guide says to throw away old ice and make a new supply.
Will a water filter fix bad-tasting ice?
It may. Kenmore says a water filter may need to be installed for taste and odor from minerals such as sulfur. In some cases a filter may not help, since not every mineral or odor can be removed.
Why is the first ice from a fresh install cloudy?
The first ice may include particles or odor from the water supply line or the tank. Throw away the first few batches. Do this too if the refrigerator has not been used for a long time.
How do I clean the ice bin?
Empty it, discarding the old cubes, wash it and make sure it is completely dry before you reinstall it, according to the troubleshooting table.
What if the ice is discolored?
Check the water supply. If the problem continues, the guide says not to use the ice or water until the problem is corrected. Book a technician.
Code, symptom, part or service
Link the message to what comes next.
Kenmore ice maker not making ice
For a Kenmore bottom-freezer ice maker that makes nothing, the guide lists a fresh install, the power switch, a dirty ice sensor, no water supply, a blocked shut-off arm or sensor, and reverse osmosis pressure. A new unit can take 12 to 24 hours to make ice.
Refrigerator ice maker
The automatic ice maker takes in water, freezes it into cubes and sends them to the bin. The Kenmore 795 guide says a new refrigerator takes 12 to 24 hours to start making ice and 72 hours to reach full output, and lists the switch, the ice sensor, the shut-off arm and the water supply as the usual checks.
Ice maker repair
Book a diagnostic for your model, carried out at the appliance.
Find your metro
Office details, and the access information to pass along.