Kenmore washer SL / Suds

Kenmore washer
error SL

Washer / display referenceSL

SL (Suds Lock) is the Calypso's way of saying it found too many suds. STOP/CANCEL wipes the display, and the next load should get less detergent.

Also shown as SL

Last reviewed

Washer / display referenceSL
Meaning
SL (Suds Lock) is the Calypso's way of saying it found too many suds. STOP/CANCEL wipes the display, and the next load should get less detergent.
Who handles it
Owner checks first, then a technician
Related codes
Source
Use & Care Guide, Kenmore Calypso washers 110.2206/2408/2506/2508

What Kenmore washer SL means.

What it means

SL (Suds Lock) is the Calypso's way of saying it found too many suds. STOP/CANCEL wipes the display, and the next load should get less detergent.

What you can safely check

Press STOP/CANCEL.

When to call a technician

SL repeats even at the guide's detergent amount.

Your checklist / stored on this device

Safe checks, in order.

0 of 5 checks done
  1. Kenmore washer SL: Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Clear the display

    Press STOP/CANCEL. That is the Calypso step for SL.

  2. A worn rating label on the rim of an older top-load washer
    Illustration. Follow your model’s instructions.
    Check 2

    Check how much detergent went in

    Too many suds is what the washer is reporting, so measure carefully next time.

  3. Over the shoulder of a technician in a navy shirt holding a tablet with a blank checklist, a white washer behind him.
    Illustration. Follow your model’s instructions.
    Check 3

    Switch to HE detergent

    The Calypso guide recommends high-efficiency detergent elsewhere on the same page.

  4. A technician with a washer drain pump in hand
    Illustration. Follow your model’s instructions.
    Check 4

    Look for foam in the tub

    If foam is spilling or stuck, wait for it to settle before refilling.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Book a visit if SL repeats

    A repeat after a small measured dose needs inspection.

Still showing SL?

Give us the model and the checks you have already done, and open your request from here.

Book a visit

Fill and the water level.

Conceptual Washer sectionInlet valveTubLevel sensorDrain pump1234
  1. 2Tub

Simplified drawing; the real layout depends on the model. Tap an outlined part to see its photo and the check that goes with it.

A little more context.

What does Suds Lock mean?

The guide gives the label Suds Lock and a single owner step, STOP/CANCEL. The meaning in plain terms is that the washer noticed more foam than it should.

Read the supporting manual

Why does detergent amount matter?

More detergent than the washer can rinse out leaves foam. The washer senses it and stops. The 110 and 796 front-load guides say to measure detergent, and the same logic applies here.

Read the supporting manual

How does SL differ from SUD and Sud?

They all report suds. SL is the Calypso printing, SUD is on 110 front-loaders and Sud on 796 front-loaders. Each family has its own recovery steps.

Read the supporting manual

The manual behind the message.

Manufacturer document

Use & Care Guide, Kenmore Calypso washers 110.2206/2408/2506/2508

Kenmore (guide as published by Sears / Transform SR Brands)

Doc L0412465 / P/N 8543703 (Sears, Roebuck and Co.) / PDF p.18 ("SL" Suds Lock)

The SL entry is in the troubleshooting list on p. 18 of guide L0412465, which spans the 110.2206 to 2508 models.

Here to help

Good questions.
Clear answers.

Talk to our team
How do I clear SL?

Press STOP/CANCEL. The display clears, and the next load should get less detergent.

Is SL the same as LS?

No. SL stands for Suds Lock, while LS stands for Lid Switch Error. The letters are reversed, so read them carefully.

What kind of detergent should the Calypso use?

The Calypso guide mentions High Efficiency detergent in its odor section, so HE detergent is the safe choice.

Can SL be caused by hard water?

The guide does not say. It names only the suds.

At what point does SL need a technician?

When SL returns even after you cut the detergent to the recommended amount.

Let’s take care of it.

Still going after all these years.
Let’s keep it that way.