What it means
For Or (Open Relay) the Calypso guide offers just the words washer operation failure and an instruction to call for service. Nothing is left to try at home; jot the code down and book a technician.
Kenmore washer Or / Control
For Or (Open Relay) the Calypso guide offers just the words washer operation failure and an instruction to call for service. Nothing is left to try at home; jot the code down and book a technician.
Also shown as Or
For Or (Open Relay) the Calypso guide offers just the words washer operation failure and an instruction to call for service. Nothing is left to try at home; jot the code down and book a technician.
Note whether the letters were upper or lower case.
Or is on the display.
Your checklist / stored on this device

Note whether the letters were upper or lower case. The guide prints Or with a capital O.

Use STOP/CANCEL and unplug it if the display stays stuck. No clearing key is offered for this one.

Repeated starts on an unexplained operation failure only waste water.

If water was in the tub, leave it for the technician instead of draining it by hand.
Give the model number: 110.2206, 2408, 2506 or 2508.
Give us the model and the checks you have already done, and open your request from here.
Book a visit

Simplified drawing; the real layout depends on the model. Tap an outlined part to see its photo and the check that goes with it.
The guide names the code and describes it as a washer operation failure. Which relay opened, and what it switches, goes unexplained.
Read the supporting manualNone is printed. The list only gives STOP/CANCEL for other codes, and for Or it says to call for service.
Read the supporting manualThe wording for Sr is the same as for this code. They share one list and both lead to a service call.
Read the supporting manualManufacturer document
Kenmore (guide as published by Sears / Transform SR Brands)
Doc L0412465 / P/N 8543703 (Sears, Roebuck and Co.) / PDF p.18
Or sits on p. 18 of guide L0412465 (models 110.2206, 2408, 2506), and the only instruction is service.
Yes. The Calypso list pairs Or with that label, the phrase operation failure and a service instruction.
The guide gives no clearing step for it. Several other Calypso codes come with a key press or a check.
The guide does not say. Leave the washer idle and arrange a visit instead of experimenting.
No. OE belongs to the 796 drain codes. Or is a Calypso relay message.
The exact characters, including that the O is a capital letter and the r is lower case, plus the cycle and the model number.
Code, symptom, part or service
CE is the Calypso's Communications Error message. The code flashes and the washer beeps once. Wipe the display with STOP/CANCEL; a CE that keeps occurring is a service matter. No cause is named, so the owner has no repair to attempt.
Start with what the display and the lid or door say. A Kenmore washer will not spin until the lid or door is latched, and an out-of-balance load, a slow drain or too many suds can each hold the spin back. Rebalance, check the drain, then book a visit.
Book a diagnostic for your model, carried out at the appliance.
Office details, and the access information to pass along.