Start from the symptom
Kenmore range gas smell.
Gas odor near a Kenmore range means no flames, no switches. The guide sends you to your gas supplier, using a neighbor's phone, and to the fire department if the supplier cannot be reached. Book a visit only after that.

Start with safe observations.
Switch the appliance off and unplug it before any owner check. Be careful around standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or go past what your model’s owner instructions allow.
- 1
Do not light anything
No flame, no appliance, no match. The Kenmore safety text opens with this rule.
- 2
Avoid switches and phones
Do not touch any electrical switch, and do not use any phone in your building.
- 3
Call from elsewhere
Reach your gas supplier on a neighbor's phone and do as they say. Nobody answering? Ring the fire department.
- 4
Do not look for the source yourself
The guide says installation and service must be done by a qualified installer, servicer or the gas supplier.
- 5
Keep flammables away
Do not store or use gasoline or other flammable vapors and liquids near the range or any other appliance.
Systems a technician may investigate.
We don’t quote parts up front. The technician names any part after the diagnostic and matches it to your exact model number before anything is replaced.
If the display adds a code.
No code is linked directly to this topic.
No other dishwasher code we have researched is linked to this topic. Compare the exact message with your model manual and do not swap in another code from the library.
See the research statusRead the related care guide.

Range panel dead? The oven lockout may be on.
If the touch panel of a Kenmore 790 range seems dead, check the oven lockout first. A Loc message means the door is locked and the keys are off. Hold the lockout key (STOP/CLEAR on some models) for 3 seconds, then wait about 15 seconds. If an F code beeps instead, clear it, reprogram and note the number.

Streaks and burned spills on a glass cooktop? Here is what lifts them.
Clean a Kenmore glass cooktop only when it is cool, with the ceramic-glass cooktop cleaning cream and a non-scratch pad. Remove metal marks soon, scrape burned-on spills with a razor scraper at a shallow angle, and never use bleach, ammonia, oven cleaner or foil. Sugar and plastic are the exception: scrape those at once.
When observation becomes a service request.
Leave internal testing to a technician.
Once the gas supplier has made the area safe, book a technician to look at the range itself. Do not run the range before then.
Arrange a diagnosticSources and model boundaries.
These sources back up the Kenmore range gas smell guidance. Read the manual that fits your model.
- Use & Care Guide, Kenmore Elite slide-in gas range 790.4260/4261
Go by the instructions for your exact model. Check how we research these pages.
What should I do first if I smell gas?
Do not light any appliance or touch any switch. Get everyone out and call your gas supplier from a neighbor's phone.
Can I turn the range off at the knob?
The guide does not list that step. Its instructions are not to light anything, avoid switches and phones, and call the supplier.
Is it OK to book a repair right now?
Contact the gas supplier first. Book us once the area is declared safe.
Who should repair a gas range?
The guide says installation and service must be done by a qualified installer, servicer or the gas supplier. Book us for the range itself once the supplier has cleared the home.
Code, symptom, part or service
Link the message to what comes next.
Kenmore range controls not responding
On the Kenmore 790 ranges, a dead-looking oven panel usually means one of four things: the oven lockout is on, the clock was never set, an F or E code stopped the control, or power is missing. Cancel the lockout first; a code needs a restart.
Range repair
Book a diagnostic for your model, carried out at the appliance.
Find your metro
Office details, and the access information to pass along.
