Start from the symptom

Kenmore range burner won't ignite.

If a Kenmore 790 gas burner will not light, the guide asks you to push the knob in and turn it fully to Lite, clear the ports, and confirm the range has power. In an outage you can light a burner with a match, carefully.

Last reviewed

Whistling kettle on a gas range grate over a burner that is not lit, the small white igniter electrode visible beside the burner cap
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Start with safe observations.

Switch the appliance off and unplug it before any owner check. Be careful around standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or go past what your model’s owner instructions allow.

  1. 1

    Push in and turn to Lite

    Press the knob in, turn it counterclockwise to Lite, watch for the flame, then set the height. All ignitors spark together but only the burner you turned will light.

  2. 2

    Do not cook at Lite

    The ignitor keeps sparking while the knob stays at Lite. Turn it down once the flame is on.

  3. 3

    Clean the ports

    With the burner off, clear clogged ports with a small-gauge wire or needle.

  4. 4

    Reseat the cap

    The cap must be level and centered. Spills in the gas orifice opening can also block ignition.

  5. 5

    Power

    The electronic ignitors need electricity. Check that the cord is in the outlet and the house has power. During an outage, hold a lit match to the burner head, then turn the knob to Lite.

Systems a technician may investigate.

We don’t quote parts up front. The technician names any part after the diagnostic and matches it to your exact model number before anything is replaced.

If the display adds a code.

No code is linked directly to this topic.

No other dishwasher code we have researched is linked to this topic. Compare the exact message with your model manual and do not swap in another code from the library.

See the research status

When observation becomes a service request.

Leave internal testing to a technician.

The burner still will not light with clean ports and power. Book a visit. If you smell gas at any point, do not keep trying to light it; go to our gas smell page first.

Arrange a diagnostic

Sources and model boundaries.

These sources back up the Kenmore range burner won't ignite guidance. Read the manual that fits your model.

  • Use & Care Guide, Kenmore Elite slide-in gas range 790.4260/4261

Go by the instructions for your exact model. Check how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Why will one burner not light?

Clogged ports or a burner cap that is not seated are the common causes. Clean the ports with the burner off and reseat the cap.

Can I light the burner with a match?

The guide allows it in a power outage: hold a lit match to the burner head, then slowly turn the knob to Lite. Take care.

Why does it click after the flame is on?

The knob is still at Lite. Turn it to the cooking setting.

Do all burners need power to light?

On this range the ignitors are electric. A cord that is unplugged or an outage will stop them.

Let’s take care of it.

Still going after all these years.
Let’s keep it that way.