Start from the symptom

Kenmore refrigerator light not working.

The Kenmore 795 guide says the refrigerator lamp is LED lighting and that a failed LED needs a qualified technician. A dark display or lights that work while the unit is warm point elsewhere: power, or Demo Mode.

Last reviewed

Open refrigerator with the top shelf area dim and a hand pointing at the clear lamp housing on the ceiling, food containers on the shelves below
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Start with safe observations.

Switch the appliance off and unplug it before any owner check. Be careful around standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or go past what your model’s owner instructions allow.

  1. 1

    Confirm power

    Plug and outlet first; the refrigerator needs 115 V, 60 Hz power at 15 or 20 amperes.

  2. 2

    Look at the display

    If the control pad shows OFF, Demo Mode is on: lights and display work but cooling is off. Hold Refrigerator Temp and Ultra Ice for five seconds with a door open.

  3. 3

    Check the interior lamp

    The guide lists "lights do not work" as an LED interior lighting failure and tells you service should be done by a qualified technician, so do not pull the cover.

  4. 4

    Door alarm

    The alarm beeps if either door stays open over 60 seconds. A tone with no light can mean an open door rather than a dead lamp.

If the display adds a code.

Keep the exact message.

We have not researched code meanings for this appliance. Use its model manual, and attach a photo of the display to your request.

See the research status

When observation becomes a service request.

Leave internal testing to a technician.

The lamp stays dark with power confirmed. Book a visit; the guide treats the LED light as service work.

Arrange a diagnostic

Sources and model boundaries.

These sources back up the Kenmore refrigerator light not working guidance. Read the manual that fits your model.

  • Use & Care Guide, Kenmore Elite bottom-freezer refrigerator 795.7802/7804/7902/7904

Go by the instructions for your exact model. Check how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Can I change the bulb myself?

The guide says the lamp is LED and that service should be done by a qualified technician. It gives no owner replacement steps.

The lights work but it is not cold. Why?

Demo Mode keeps lights and display normal while cooling is off. Check the display for OFF.

How do I turn off Demo Mode?

With a door open, press and hold Refrigerator Temp and Ultra Ice together for five seconds. The pad beeps and shows temperatures.

Does the display going dark mean the light failed?

Not necessarily; it may be power. Check the outlet and breaker first.

Let’s take care of it.

Still going after all these years.
Let’s keep it that way.